Oracle Linux On Windows 10 host: which bridged adapter?

Discussions related to using VirtualBox on Windows hosts.
Post Reply
edx
Posts: 12
Joined: 22. May 2018, 11:46

Oracle Linux On Windows 10 host: which bridged adapter?

Post by edx »

Informations:

os: Windows 10 pro 1709
laptop: Lenovo Thinkpad E570
Virtualbox: 5.2.12

Hello, I need to configure Virtualbox to use Oracle Linux, but I can't connect. I have various adapter, I tried all of them but still no connection, neither updating my network drivers.
Someone has some idea?

Thanks
Attachments
network.png
network.png (33.2 KiB) Viewed 2867 times
andyp73
Volunteer
Posts: 1631
Joined: 25. May 2010, 23:48
Primary OS: Mac OS X other
VBox Version: PUEL
Guest OSses: Assorted Linux, Windows Server 2012, DOS, Windows 10, BIOS/UEFI emulation

Re: Oracle Linux On Windows 10 host: which bridged adapter?

Post by andyp73 »

In the user manual Ch 6.2. Introduction to networking modes includes a table that defines how the various modes work.

By choosing "Bridged Adapter" as your screenshot shows then your guest will appear as a discrete machine on the network as it would if you connected a new physical computer. If you bridge to the "Realtek PCI GBE Family Controller" then you will need to have a network cable physically plugged into your laptop.

You could try bridging to the "Realtek 8821CE Wireless LAN 802.11ac PCI-E NIC" but be aware that this is beyond the scope of the wireless specification. In some cases the combination of Wi-Fi adapter, access point and drivers work but in others they don't and there isn't a great deal can be done about it.

If you want the simplest option just to give the guest access to the internet then the default NAT mode is probably good enough.

-Andy.
My crystal ball is currently broken. If you want assistance you are going to have to give me all of the necessary information.
Please don't ask me to do your homework for you, I have more than enough of my own things to do.
edx
Posts: 12
Joined: 22. May 2018, 11:46

Re: Oracle Linux On Windows 10 host: which bridged adapter?

Post by edx »

Thanks for the reply. I have a physical ethernet cable into my laptop.
I tried with NAT and it worked for the system in general, but not for Firefox. Also I tried to use Putty to connect Windows 10 to OEL but I can't find it.
With NAT I can't see virtual machine's IP.
[edx@localhost ~]$ ifconfig -a |more
enp0s3: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 10.0.2.15  netmask 255.255.255.0  broadcast 10.0.2.255
        inet6 fe80::2dbd:4098:5c77:c108  prefixlen 64  scopeid 0x20<link>
        ether 08:00:27:6e:fd:42  txqueuelen 1000  (Ethernet)
        RX packets 5922  bytes 3983728 (3.7 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 8211  bytes 764876 (746.9 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 0  (Local Loopback)
        RX packets 4  bytes 340 (340.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 4  bytes 340 (340.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

virbr0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        inet 192.168.122.1  netmask 255.255.255.0  broadcast 192.168.122.255
        ether 52:54:00:81:18:40  txqueuelen 0  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
Windows prompt can't ping 10.0.2.15 and I think that a NAT problem, isn't it?
Last edited by socratis on 22. May 2018, 15:34, edited 1 time in total.
Reason: Enclosed the information in [pre] tag for better readability
edx
Posts: 12
Joined: 22. May 2018, 11:46

Re: Oracle Linux On Windows 10 host: which bridged adapter?

Post by edx »

I just noticed that I can ping the second: 127.0.0.1.
I can't figure what is it and why...
andyp73
Volunteer
Posts: 1631
Joined: 25. May 2010, 23:48
Primary OS: Mac OS X other
VBox Version: PUEL
Guest OSses: Assorted Linux, Windows Server 2012, DOS, Windows 10, BIOS/UEFI emulation

Re: Oracle Linux On Windows 10 host: which bridged adapter?

Post by andyp73 »

127.0.0.1 is the localhost adapter and IP address and effectively is a loopback interface.

As you have a network cable attached to your laptop, set the guest network adapter to "Bridged Mode" and bridge it to "Realtek PCI GBE Family Controller". Then can you post the output of the following:

On the host:
ipconfig /all
and in the guest:
ifconfig -a
-Andy.
My crystal ball is currently broken. If you want assistance you are going to have to give me all of the necessary information.
Please don't ask me to do your homework for you, I have more than enough of my own things to do.
edx
Posts: 12
Joined: 22. May 2018, 11:46

Re: Oracle Linux On Windows 10 host: which bridged adapter?

Post by edx »

Code: Select all

Windows IP Configuration

   Host Name . . . . . . . . . . . . : DESKTOP-RP6P81S
   Primary Dns Suffix  . . . . . . . :
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
   DNS Suffix Search List. . . . . . : corp.xxx.it

Ethernet adapter Ethernet 3:

   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Fortinet SSL VPN Virtual Ethernet Adapter
   Physical Address. . . . . . . . . : 00-09-0F-AA-00-01
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes

Ethernet adapter VirtualBox Host-Only Network:

   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : VirtualBox Host-Only Ethernet Adapter
   Physical Address. . . . . . . . . : 0A-00-27-00-00-0E
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::c8ff:6313:80b2:15ad%14(Preferred)
   IPv4 Address. . . . . . . . . . . : 192.168.56.1(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . :
   DHCPv6 IAID . . . . . . . . . . . : 973733927
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-21-3B-78-A1-54-E1-AD-79-F2-10
   DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
                                       fec0:0:0:ffff::2%1
                                       fec0:0:0:ffff::3%1
   NetBIOS over Tcpip. . . . . . . . : Enabled

Wireless LAN adapter Wi-Fi:

   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . : lan
   Description . . . . . . . . . . . : Realtek 8821CE Wireless LAN 802.11ac PCI-E NIC
   Physical Address. . . . . . . . . : 60-14-B3-81-6E-F1
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes

Wireless LAN adapter Local Area Connection* 1:

   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Microsoft Wi-Fi Direct Virtual Adapter
   Physical Address. . . . . . . . . : 62-14-B3-81-6E-F1
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes

Ethernet adapter Ethernet:

   Connection-specific DNS Suffix  . : corp.xxx.it
   Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller
   Physical Address. . . . . . . . . : 54-E1-AD-79-F2-10
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::1810:5834:c2fe:ad65%2(Preferred)
   IPv4 Address. . . . . . . . . . . : 10.202.126.61(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.254.0
   Lease Obtained. . . . . . . . . . : Tuesday, May 22, 2018 11:34:46 AM
   Lease Expires . . . . . . . . . . : Wednesday, May 30, 2018 1:28:30 PM
   Default Gateway . . . . . . . . . : 10.202.126.1
   DHCP Server . . . . . . . . . . . : 10.202.110.49
   DHCPv6 IAID . . . . . . . . . . . : 55894445
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-21-3B-78-A1-54-E1-AD-79-F2-10
   DNS Servers . . . . . . . . . . . : 10.202.110.85
                                       10.202.110.78
                                       10.202.8.142
   Primary WINS Server . . . . . . . : 10.202.8.63
   Secondary WINS Server . . . . . . : 10.202.110.87
   NetBIOS over Tcpip. . . . . . . . : Enabled

Ethernet adapter Ethernet 2:

   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Fortinet Virtual Ethernet Adapter (NDIS 6.30)
   Physical Address. . . . . . . . . : 00-09-0F-FE-00-01
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes

Ethernet adapter Bluetooth Network Connection:

   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Bluetooth Device (Personal Area Network)
   Physical Address. . . . . . . . . : 60-14-B3-81-6E-F2
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes

Code: Select all

[edx@localhost ~]$ ifconfig -a
enp0s3: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 10.0.2.15  netmask 255.255.255.0  broadcast 10.0.2.255
        inet6 fe80::2dbd:4098:5c77:c108  prefixlen 64  scopeid 0x20<link>
        ether 08:00:27:6e:fd:42  txqueuelen 1000  (Ethernet)
        RX packets 23  bytes 2941 (2.8 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 90  bytes 10068 (9.8 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

enp0s8: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        ether 08:00:27:b9:33:b1  txqueuelen 1000  (Ethernet)
        RX packets 1767  bytes 322881 (315.3 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 0  (Local Loopback)
        RX packets 4  bytes 340 (340.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 4  bytes 340 (340.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

virbr0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        inet 192.168.122.1  netmask 255.255.255.0  broadcast 192.168.122.255
        ether 52:54:00:81:18:40  txqueuelen 0  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

virbr0-nic: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 52:54:00:81:18:40  txqueuelen 500  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
This is Vbox network config
Thanks for your time
Attachments
network.PNG
network.PNG (6.07 KiB) Viewed 2853 times
Last edited by socratis on 22. May 2018, 15:38, edited 1 time in total.
Reason: Enclosed the information in [code] tag for better readability
edx
Posts: 12
Joined: 22. May 2018, 11:46

Re: Oracle Linux On Windows 10 host: which bridged adapter?

Post by edx »

I forget to say that there is a proxy server, I don't know if it does matter
andyp73
Volunteer
Posts: 1631
Joined: 25. May 2010, 23:48
Primary OS: Mac OS X other
VBox Version: PUEL
Guest OSses: Assorted Linux, Windows Server 2012, DOS, Windows 10, BIOS/UEFI emulation

Re: Oracle Linux On Windows 10 host: which bridged adapter?

Post by andyp73 »

Looking at the output, your host has an IP address of 10.202.126.61 and a gateway of 10.202.126.1. I would expect that if your Linux guest has DHCP enabled rather than being set to a static IP address then it too would get an IP address in the same 10.202.126.xxx range.

Your Linux guest is reporting 10.0.2.15 for interface enp0s3 which will be the NAT adapter and no IP address for enp0s8 which will be the bridged adapter. In the guest can you try:
dhclient -v enp0s8
and then post the results (ideally using the code tags so Socratis doesn't have to stop by and edit your message! :))

-Andy.
My crystal ball is currently broken. If you want assistance you are going to have to give me all of the necessary information.
Please don't ask me to do your homework for you, I have more than enough of my own things to do.
socratis
Site Moderator
Posts: 27330
Joined: 22. Oct 2010, 11:03
Primary OS: Mac OS X other
VBox Version: PUEL
Guest OSses: Win(*>98), Linux*, OSX>10.5
Location: Greece

Re: Oracle Linux On Windows 10 host: which bridged adapter?

Post by socratis »

edx wrote:I tried with NAT and it worked for the system in general, but not for Firefox.
edx wrote:I forget to say that there is a proxy server, I don't know if it does matter
Now you know the answer to why Firefox was not working, you needed to go through the proxy server...

On the why you might not be getting an IP... Some distros have their setup so that only one NIC is active, mainly the 1st one. Can you see if in the properties of the NIC (from within the guest), the connection is set to be "Always available" (or something like that)?


andyp73 wrote:ideally using the code tags so Socratis doesn't have to stop by and edit your message!
Are you trying to run me out of business sir? I have a family of 17 to feed!!!
(and those are my children alone, without the harem inhabitants)

[Code_tag] or not, the eye of Sauron a moderator is always vengeful supportive and caring. :twisted:
Do NOT send me Personal Messages (PMs) for troubleshooting, they are simply deleted.
Do NOT reply with the "QUOTE" button, please use the "POST REPLY", at the bottom of the form.
If you obfuscate any information requested, I will obfuscate my response. These are virtual UUIDs, not real ones.
edx
Posts: 12
Joined: 22. May 2018, 11:46

Re: Oracle Linux On Windows 10 host: which bridged adapter?

Post by edx »

I have DHCP enabled.

Code: Select all

[edx@localhost ~]$ sudo dhclient -v enp0s8
[sudo] password for edx: 
Internet Systems Consortium DHCP Client 4.2.5
Copyright 2004-2013 Internet Systems Consortium.
All rights reserved.
For info, please visit 

Listening on LPF/enp0s8/08:00:27:b9:33:b1
Sending on   LPF/enp0s8/08:00:27:b9:33:b1
Sending on   Socket/fallback
DHCPDISCOVER on enp0s8 to 255.255.255.255 port 67 interval 5 (xid=0x120db79f)
DHCPDISCOVER on enp0s8 to 255.255.255.255 port 67 interval 9 (xid=0x120db79f)
DHCPREQUEST on enp0s8 to 255.255.255.255 port 67 (xid=0x120db79f)
DHCPOFFER from 10.202.126.2
DHCPACK from 10.202.126.3 (xid=0x120db79f)
bound to 10.202.126.186 -- renewal in 344051 seconds.

Socratis, I set up proxy though system configuration and Firefox network configurations. Still not work.
I don't know what NIC is, on google can't find info about on OEL system. So I can not tell you if is "Always available", unfortunately...

Thanks both for the help.
Attachments
ping.PNG
ping.PNG (16.98 KiB) Viewed 2786 times
proxy.PNG
proxy.PNG (34.42 KiB) Viewed 2786 times
dhcp.PNG
dhcp.PNG (29.88 KiB) Viewed 2786 times
andyp73
Volunteer
Posts: 1631
Joined: 25. May 2010, 23:48
Primary OS: Mac OS X other
VBox Version: PUEL
Guest OSses: Assorted Linux, Windows Server 2012, DOS, Windows 10, BIOS/UEFI emulation

Re: Oracle Linux On Windows 10 host: which bridged adapter?

Post by andyp73 »

The output from running the dhclient command looks like it has given the bridged adapter IP address 10.202.126.186 (which matches the address range the host Ethernet interface is getting) so I think you are into the territory of a Linux networking configuration issue rather than it being a VirtualBox issue per se. To see what is really going on can we see the output of running the following in the guest:
ifconfig -a
route
ping 10.202.126.1
ping 10.202.110.85
ping 1.1.1.1
ping download.virtualbox.org
-Andy
My crystal ball is currently broken. If you want assistance you are going to have to give me all of the necessary information.
Please don't ask me to do your homework for you, I have more than enough of my own things to do.
edx
Posts: 12
Joined: 22. May 2018, 11:46

Re: Oracle Linux On Windows 10 host: which bridged adapter?

Post by edx »

Here you are :wink:

Code: Select all

[edx@localhost ~]$ ifconfig -a
enp0s3: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 10.0.2.15  netmask 255.255.255.0  broadcast 10.0.2.255
        inet6 fe80::2dbd:4098:5c77:c108  prefixlen 64  scopeid 0x20<link>
        ether 08:00:27:6e:fd:42  txqueuelen 1000  (Ethernet)
        RX packets 304  bytes 91432 (89.2 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 397  bytes 44630 (43.5 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

enp0s8: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 10.202.126.186  netmask 255.255.254.0  broadcast 10.202.127.255
        inet6 fe80::a00:27ff:feb9:33b1  prefixlen 64  scopeid 0x20<link>
        ether 08:00:27:b9:33:b1  txqueuelen 1000  (Ethernet)
        RX packets 25579  bytes 4470784 (4.2 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 93  bytes 13029 (12.7 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 0  (Local Loopback)
        RX packets 8  bytes 680 (680.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 8  bytes 680 (680.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

virbr0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        inet 192.168.122.1  netmask 255.255.255.0  broadcast 192.168.122.255
        ether 52:54:00:81:18:40  txqueuelen 0  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

virbr0-nic: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 52:54:00:81:18:40  txqueuelen 500  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

[edx@localhost ~]$ route
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
default         gateway         0.0.0.0         UG    100    0        0 enp0s3
default         gateway         0.0.0.0         UG    101    0        0 enp0s8
10.0.2.0        0.0.0.0         255.255.255.0   U     100    0        0 enp0s3
10.202.110.49   gateway         255.255.255.255 UGH   100    0        0 enp0s8
10.202.126.0    0.0.0.0         255.255.254.0   U     0      0        0 enp0s8
192.168.122.0   0.0.0.0         255.255.255.0   U     0      0        0 virbr0
[edx@localhost ~]$ ping 10.202.126.1
PING 10.202.126.1 (10.202.126.1) 56(84) bytes of data.
64 bytes from 10.202.126.1: icmp_seq=1 ttl=255 time=1.62 ms
64 bytes from 10.202.126.1: icmp_seq=2 ttl=255 time=0.950 ms
64 bytes from 10.202.126.1: icmp_seq=3 ttl=255 time=1.67 ms
64 bytes from 10.202.126.1: icmp_seq=4 ttl=255 time=1.08 ms
64 bytes from 10.202.126.1: icmp_seq=5 ttl=255 time=1.16 ms
64 bytes from 10.202.126.1: icmp_seq=6 ttl=255 time=1.72 ms
^C
--- 10.202.126.1 ping statistics ---
6 packets transmitted, 6 received, 0% packet loss, time 5008ms
rtt min/avg/max/mdev = 0.950/1.370/1.726/0.313 ms
[edx@localhost ~]$ ping 10.202.110.85
PING 10.202.110.85 (10.202.110.85) 56(84) bytes of data.
64 bytes from 10.202.110.85: icmp_seq=1 ttl=126 time=1.58 ms
64 bytes from 10.202.110.85: icmp_seq=2 ttl=126 time=1.76 ms
64 bytes from 10.202.110.85: icmp_seq=3 ttl=126 time=2.38 ms
64 bytes from 10.202.110.85: icmp_seq=4 ttl=126 time=2.38 ms
^C
--- 10.202.110.85 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3011ms
rtt min/avg/max/mdev = 1.584/2.032/2.389/0.361 ms
[edx@localhost ~]$ ping 1.1.1.1
PING 1.1.1.1 (1.1.1.1) 56(84) bytes of data.
64 bytes from 1.1.1.1: icmp_seq=1 ttl=52 time=7.62 ms
64 bytes from 1.1.1.1: icmp_seq=2 ttl=52 time=8.65 ms
64 bytes from 1.1.1.1: icmp_seq=3 ttl=52 time=15.2 ms
64 bytes from 1.1.1.1: icmp_seq=4 ttl=52 time=7.45 ms
64 bytes from 1.1.1.1: icmp_seq=5 ttl=52 time=8.10 ms
^C
--- 1.1.1.1 ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 4010ms
rtt min/avg/max/mdev = 7.458/9.423/15.277/2.957 ms
[edx@localhost ~]$ ping download.virtualbox.org
PING e14618.d.akamaiedge.net (2.21.164.243) 56(84) bytes of data.
64 bytes from a2-21-164-243.deploy.static.akamaitechnologies.com (2.21.164.243): icmp_seq=1 ttl=50 time=12.4 ms
64 bytes from a2-21-164-243.deploy.static.akamaitechnologies.com (2.21.164.243): icmp_seq=2 ttl=50 time=13.7 ms
64 bytes from a2-21-164-243.deploy.static.akamaitechnologies.com (2.21.164.243): icmp_seq=3 ttl=50 time=12.0 ms
^C
--- e14618.d.akamaiedge.net ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2003ms
rtt min/avg/max/mdev = 12.086/12.754/13.723/0.707 ms
[edx@localhost ~]$ 
For the NIC the only thing I found:

Code: Select all

[edx@localhost ~]$ dmesg | tail 
[   48.136517] virbr0: port 1(virbr0-nic) entered listening state
[   48.136523] virbr0: port 1(virbr0-nic) entered listening state
[   48.347278] virbr0: port 1(virbr0-nic) entered disabled state
[  135.027788] fuse init (API version 7.23)
[  142.295803] ISO 9660 Extensions: Microsoft Joliet Level 3
[  142.385582] ISO 9660 Extensions: RRIP_1991A
[ 3593.401018] e1000: enp0s8 NIC Link is Down
[ 3597.401267] e1000: enp0s8 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 3598.531239] 00:59:30.343272 timesync vgsvcTimeSyncWorker: Radical host time change: 4 585 300 000 000ns (HostNow=1 527 074 490 835 000 000 ns HostLast=1 527 069 905 535 000 000 ns)
[ 3608.532026] 00:59:40.343922 timesync vgsvcTimeSyncWorker: Radical guest time change: 4 585 333 280 000ns (GuestNow=1 527 074 500 835 693 000 ns GuestLast=1 527 069 915 502 413 000 ns fSetTimeLastLoop=true )
[edx@localhost ~]$ lspci
00:00.0 Host bridge: Intel Corporation 440FX - 82441FX PMC [Natoma] (rev 02)
00:01.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II]
00:01.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
00:02.0 VGA compatible controller: InnoTek Systemberatung GmbH VirtualBox Graphics Adapter
00:03.0 Ethernet controller: Intel Corporation 82540EM Gigabit Ethernet Controller (rev 02)
00:04.0 System peripheral: InnoTek Systemberatung GmbH VirtualBox Guest Service
00:05.0 Multimedia audio controller: Intel Corporation 82801AA AC'97 Audio Controller (rev 01)
00:06.0 USB controller: Apple Inc. KeyLargo/Intrepid USB
00:07.0 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 08)
00:08.0 Ethernet controller: Intel Corporation 82540EM Gigabit Ethernet Controller (rev 02)
00:0d.0 SATA controller: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] (rev 02)
Last edited by edx on 23. May 2018, 13:34, edited 1 time in total.
andyp73
Volunteer
Posts: 1631
Joined: 25. May 2010, 23:48
Primary OS: Mac OS X other
VBox Version: PUEL
Guest OSses: Assorted Linux, Windows Server 2012, DOS, Windows 10, BIOS/UEFI emulation

Re: Oracle Linux On Windows 10 host: which bridged adapter?

Post by andyp73 »

As all of the ping commands work, at a fundamental level the networking is all working correctly. If applications such as browsers need specific proxy settings then you need to set those up in the same way as the corresponding applications on your host.

At this point, we can conclusively say that VirtualBox is doing its job and doing it well! :)

-Andy.
My crystal ball is currently broken. If you want assistance you are going to have to give me all of the necessary information.
Please don't ask me to do your homework for you, I have more than enough of my own things to do.
edx
Posts: 12
Joined: 22. May 2018, 11:46

Re: Oracle Linux On Windows 10 host: which bridged adapter?

Post by edx »

Yep, now I can find the ip through the host and connect it using Putty. :D
Just one more thing, can you suggest me one forum where I can post about the proxy problem?
Thank you so much, I appreciated a lot :wink:
Edoardo
Post Reply