How to recognize my usb wifi adapter ?

[Fielding]

I have tried to recognize my usb wifi adapter Alfa Network

I would like deshabilitate the connected internet signal and configured the internet signal from the usb wifi adapter.

Alfa Network Realtek 8812AU Wireless LAN 802.11ac USB NIC

How can I configure this ?

Best Regards

[socratis]

You need to tell us your host, your guest, your VirtualBox version. With full details.

With the USB device plugged in and the VM not running, post the output of the following commands:

• 
  cd "C:\Program Files\Oracle\VirtualBox"      <-- change it if not the default installation
  VBoxManage -version
  VBoxManage list usbhost
  VBoxManage list usbfilters
  VBoxManage list extpacks
  VBoxManage showvminfo "Your_Virtual_Machine_Name"

[Fielding]

I will try to obtain help in other forums.

Best Regards.

P.D. Try to help to other please.

[Fielding]

Results investigation in other forums.

I will need to install the linux driver in order to recognize the wifi adapter in bridged mode.
This is being a difficult subject because the driver for the dispositive is not easy to install.
All the investigation leads to :

https://github.com/astsam/rtl8812au

With this driver seems you can obtain the internet signal, injection and "modo espera" for wifi audit security.

Best Regards

[Fielding]

I am trying to connect this usb adapter Alfa Network AWUS036AC wireless adapter

How can I configure Virualbox to recognize ?

Guest Kali Linux last version
Host windows 8.1
VirtualBox last version

Best Regards

[socratis]

I merged your last post with the exact same topic that you opened two weeks ago. According to the forum rules, duplicates are not allowed. If you have an open topic, please post on that.

The answer was already given, but you didn't provide any information.

[toti1981]

Hi Socratis,
i have the same problem. I executed the commands you gave. Below output.
Thanks a lot

Code: Select all

todor@atanasov:~$ VBoxManage -version
5.2.8r121009

Code: Select all

todor@atanasov:~$ VBoxManage list usbhost
Host USB Devices:

<none>

Code: Select all

todor@atanasov:~$ VBoxManage list usbfilters
Global USB Device Filters:

<none>

Code: Select all

todor@atanasov:~$ VBoxManage list extpacks
Extension Packs: 1
Pack no. 0:   Oracle VM VirtualBox Extension Pack
Version:      5.2.8
Revision:     121009
Edition:      
Description:  USB 2.0 and USB 3.0 Host Controller, Host Webcam, VirtualBox RDP, PXE ROM, Disk Encryption, NVMe.
VRDE Module:  VBoxVRDP
Usable:       true 
Why unusable: 

Code: Select all

todor@atanasov:~$ VBoxManage showvminfo "cfg"
Name:            cfg
Groups:          /
Guest OS:        Windows 10 (64-bit)
UUID:            1b998739-f94f-4122-b0dc-b7c7b722a22c
Config file:     /home/todor/VirtualBox VMs/cfg/cfg.vbox
Snapshot folder: /home/todor/VirtualBox VMs/cfg/Snapshots
Log folder:      /home/todor/VirtualBox VMs/cfg/Logs
Hardware UUID:   1b998739-f94f-4122-b0dc-b7c7b722a22c
Memory size:     4096MB
Page Fusion:     off
VRAM size:       128MB
CPU exec cap:    100%
HPET:            off
Chipset:         piix3
Firmware:        BIOS
Number of CPUs:  1
PAE:             off
Long Mode:       on
Triple Fault Reset: off
APIC:            on
X2APIC:          off
CPUID Portability Level: 0
CPUID overrides: None
Boot menu mode:  message and menu
Boot Device (1): DVD
Boot Device (2): HardDisk
Boot Device (3): Network
Boot Device (4): Floppy
ACPI:            on
IOAPIC:          on
BIOS APIC mode:  APIC
Time offset:     0ms
RTC:             local time
Hardw. virt.ext: on
Nested Paging:   on
Large Pages:     off
VT-x VPID:       on
VT-x unr. exec.: on
Paravirt. Provider: Default
Effective Paravirt. Provider: HyperV
State:           running (since 2018-04-25T07:08:05.308000000)
Monitor count:   1
3D Acceleration: off
2D Video Acceleration: off
Teleporter Enabled: off
Teleporter Port: 0
Teleporter Address: 
Teleporter Password: 
Tracing Enabled: off
Allow Tracing to Access VM: off
Tracing Configuration: 
Autostart Enabled: off
Autostart Delay: 0
Default Frontend: 
Storage Controller Name (0):            SATA
Storage Controller Type (0):            IntelAhci
Storage Controller Instance Number (0): 0
Storage Controller Max Port Count (0):  30
Storage Controller Port Count (0):      3
Storage Controller Bootable (0):        on
SATA (0, 0): /home/todor/VirtualBox VMs/cfg/cfg.vdi (UUID: 3f710aad-362a-419f-a7ed-041e5bc9432c)
SATA (1, 0): Empty
NIC 1:           MAC: 080027B75C8D, Attachment: Bridged Interface 'wlx74da380e3f56', Cable connected: on, Trace: off (file: none), Type: 82545EM, Reported speed: 0 Mbps, Boot priority: 0, Promisc Policy: deny, Bandwidth group: none
NIC 2:           disabled
NIC 3:           disabled
NIC 4:           disabled
NIC 5:           disabled
NIC 6:           disabled
NIC 7:           disabled
NIC 8:           disabled
Pointing Device: USB Tablet
Keyboard Device: PS/2 Keyboard
UART 1:          disabled
UART 2:          disabled
UART 3:          disabled
UART 4:          disabled
LPT 1:           disabled
LPT 2:           disabled
Audio:           enabled (Driver: ALSA, Controller: HDA, Codec: STAC9221)
Audio playback:  disabled
Audio capture: disabled
Clipboard Mode:  Bidirectional
Drag and drop Mode: Bidirectional
Session name:    GUI/Qt
Video mode:      1280x958x32 at 0,0 enabled
VRDE:            disabled
USB:             disabled
EHCI:            disabled
XHCI:            enabled

USB Device Filters:

<none>

Available remote USB devices:

<none>

Currently Attached USB Devices:

<none>

Bandwidth groups:  <none>

Shared folders:  <none>

VRDE Connection:    not active
Clients so far:     0

Capturing:          not active
Capture audio:      not active
Capture screens:    0
Capture file:       /home/todor/VirtualBox VMs/cfg/cfg.webm
Capture dimensions: 1024x768
Capture rate:       512 kbps
Capture FPS:        25
Capture options:    ac_enabled=false

Guest:

Configured memory balloon size:      0 MB
OS type:                             Windows10_64
Additions run level:                 3
Additions version:                   5.2.8 r121009


Guest Facilities:

Facility "VirtualBox Base Driver": active/running (last update: 2018/04/24 06:28:39 UTC)
Facility "VirtualBox System Service": active/running (last update: 2018/04/25 06:56:16 UTC)
Facility "VirtualBox Desktop Integration": active/running (last update: 2018/04/24 06:46:43 UTC)
Facility "Seamless Mode": active/running (last update: 2018/04/25 06:56:20 UTC)
Facility "Graphics Mode": active/running (last update: 2018/04/25 06:56:10 UTC)

[socratis]

i have the same problem.

Please, please... Never go with "me too". Describe your problem with full details!