USB Ethernet Adapter Issue
Posted: 24. Sep 2015, 23:24
Hi,
I have the following issue with an usb ethernet adapter. I read a lot of posts on the topic but I could not arrive to a solution. Maybe I am mixing up the many different solutions people have provided
So the host machine is a windows 7 and I have virtual box running Ubuntu 14.04. Virtualbox perfectly connects the interface eth0 with my onboard ethernet, however I am having issues with the eth1 (usb adapter).
I tried the following:
1) Added a second adapter with a Bridge Adapter, selected the USB adapter and chose the Adapter Type (under Advanced) as Intel Pro/1000 MT Desktop
Under Ubuntu I see eth1 now, but no ip address is assigned. Whenever I try to assign one using ifconfig, the ip address stays for a bit and then disappears ... If i ping
the machine on the other side the ping responds for a while and then stops. A new ifconfig command shows the ip address of eth1 empty
2) I tried to install the adapter as USB (not under network) and when I boot ubuntu in the virtual box, I now see a eth2 interface. But again without any ip assigned. If I set one using ifconfig I can again ping for a while and then resets.
I installed Virtualbox with GuestEdtion and extensions.
Any clue ? I think that given that the interface does not come up with an ip address assigned it is a VirtualBox issue.
I also tried to follow another set of posts where there was the suggestion to follow 2) but to plug in the usb adapter only *after* the VirtualBox and Ubuntu started ... nothing ... same behavior as described above.
Any idea at this point would be really appreciated!
Thanks!
I have the following issue with an usb ethernet adapter. I read a lot of posts on the topic but I could not arrive to a solution. Maybe I am mixing up the many different solutions people have provided
So the host machine is a windows 7 and I have virtual box running Ubuntu 14.04. Virtualbox perfectly connects the interface eth0 with my onboard ethernet, however I am having issues with the eth1 (usb adapter).
I tried the following:
1) Added a second adapter with a Bridge Adapter, selected the USB adapter and chose the Adapter Type (under Advanced) as Intel Pro/1000 MT Desktop
Under Ubuntu I see eth1 now, but no ip address is assigned. Whenever I try to assign one using ifconfig, the ip address stays for a bit and then disappears ... If i ping
the machine on the other side the ping responds for a while and then stops. A new ifconfig command shows the ip address of eth1 empty
2) I tried to install the adapter as USB (not under network) and when I boot ubuntu in the virtual box, I now see a eth2 interface. But again without any ip assigned. If I set one using ifconfig I can again ping for a while and then resets.
I installed Virtualbox with GuestEdtion and extensions.
Any clue ? I think that given that the interface does not come up with an ip address assigned it is a VirtualBox issue.
I also tried to follow another set of posts where there was the suggestion to follow 2) but to plug in the usb adapter only *after* the VirtualBox and Ubuntu started ... nothing ... same behavior as described above.
Any idea at this point would be really appreciated!
Thanks!