That's because the solution was offered for Windows 7, not Windows 10!BoldyBoddinton wrote:@Noteirak
For me (windows 10) your solution prevented VM's from opening altogether with a error about network.
No bridged mode with 5.0.4 on Windows 7
-
- Oracle Corporation
- Posts: 2973
- Joined: 19. Dec 2007, 15:45
- Primary OS: MS Windows 7
- VBox Version: PUEL
- Guest OSses: Any and all
- Contact:
Re: No bridged mode with 5.0.4 on Windows 7
-
- Site Moderator
- Posts: 5229
- Joined: 13. Jan 2012, 11:14
- Primary OS: Debian other
- VBox Version: OSE Debian
- Guest OSses: Debian, Win 2k8, Win 7
- Contact:
Re: No bridged mode with 5.0.4 on Windows 7
Then I can only advise you to read the topic names carefully, especially when those mention Windows 7 and not Windows 10.BoldyBoddinton wrote:@Noteirak
For me (windows 10) your solution prevented VM's from opening altogether with a error about network.
Hyperbox - Virtual Infrastructure Manager - https://apps.kamax.lu/hyperbox/
Manage your VirtualBox infrastructure the free way!
Manage your VirtualBox infrastructure the free way!
Re: No bridged mode with 5.0.4 on Windows 7
what you mean tick n untick..??BoldyBoddinton wrote:I already made a thread about this, but Im using windows 10. to get bridge mode working, open your VM then goto host network properties and untick/tick IPv6 once or twice and select OK, everythig works till next reboot, rinse and repeat.
at least at the end the ipv6 is with the flag or without the flag..??
-
- Posts: 19
- Joined: 18. Sep 2011, 12:24
- Primary OS: MS Windows 7
- VBox Version: PUEL
- Guest OSses: Windows XP (64 bit), Kubuntu (64 bit)
Re: No bridged mode with 5.0.4 on Windows 7
This solution did not solve my issue because when I had version 5.0.2 of VirtialBox, I could use bridging with any of my three network adapters, but now I see only one of them in my VirualBox guest configurations. All two of my Intel network adapters disappeared from the list of my network adapters.noteirak wrote:For those affected by this issue, the quick fix (until the issue is resolved) is to force VirtualBox 5.0.x to install with the NDIS5 driver:
1. Uninstall VirtualBox
2. Reinstall Virtualbox using the following command:Only post here again if it did not solve your issue.Code: Select all
VirtualBox-x.x.x-yyyyy-Win.exe -msiparams NETWORKTYPE=NDIS5
I uninstalled VirtualBox and reinstalled it again with the following command: "VirtualBox-5.0.4-102546-Win.exe -msiparams NETWORKTYPE=NDIS5" with no luck.
* Update:
I found the correct description of the issue that I see in my environment.
See bugtracker ticket Unable to select network adaptor that has TCP/IP disabled for details.
Last edited by LastWord on 6. Oct 2015, 00:37, edited 2 times in total.
Re: No bridged mode with 5.0.4 on Windows 7
Greetings. Having same type of problem as others.
In my case, I have a Fatal1ty mainboard with two Realtek adapters and an add on Intel Pro/1000 PCI dual nic. I had vmware player installed, and it could see all four NIC's the host OS sees all 4 NICS, so my thought is that the hardware works.
Under VBox, I do not see the Intel PCI card, only the Realtek cards which are on the mainboard itself. I did install VBox 5.04, then uninstalled, and then reinstalled using the network type command line switch, as shown below. Upon reinstall, VBox showed me the VM I was setting up
S:\Data\Software\Virtualbox>VirtualBox-5.0.4-102546-Win.exe -msiparams NETWORKTYPE=NDIS5
I'm going to vie downloading and installing 5.0.2 a whirl to see if that makes any difference at all.
In my case, I have a Fatal1ty mainboard with two Realtek adapters and an add on Intel Pro/1000 PCI dual nic. I had vmware player installed, and it could see all four NIC's the host OS sees all 4 NICS, so my thought is that the hardware works.
Under VBox, I do not see the Intel PCI card, only the Realtek cards which are on the mainboard itself. I did install VBox 5.04, then uninstalled, and then reinstalled using the network type command line switch, as shown below. Upon reinstall, VBox showed me the VM I was setting up
S:\Data\Software\Virtualbox>VirtualBox-5.0.4-102546-Win.exe -msiparams NETWORKTYPE=NDIS5
I'm going to vie downloading and installing 5.0.2 a whirl to see if that makes any difference at all.
Re: No bridged mode with 5.0.4 on Windows 7
Greetings again. In support of my post -> Postby Don12345 » 24. Sep 2015, 04:38
Yep, installed VBox 5.0.2 (did not install the extension package). and then fired up the PFsense installer. I connected one NIC to one of the adapters on my mainboard, and another adapter to my separate Intel Pro PCI card. pfsense installed fine, got a DHCP address on the WAN interface (the one mapped to the Realtex adapter on my mainboard), and I could assign an IP to the NIC mapped to my Intel PCI card. After that, I could get to the web interface using the secondary NIC.
Net effect - like others - VBox 5.0.4 will not see (in my case) the add on Network adapter, just the ones on the mainboard. I did use the ndis5 command line switch, which did not help. However, VBox 5.0.2 could see all for network adapters, and use them.
This, of course, for me, is a real dissappointment, b/c I would really like to upgrade my Win7 PC to Win10, but alas .. one must wait for these things to be worked. Go Oracle Go!!! And thank you for releasing this software.
Yep, installed VBox 5.0.2 (did not install the extension package). and then fired up the PFsense installer. I connected one NIC to one of the adapters on my mainboard, and another adapter to my separate Intel Pro PCI card. pfsense installed fine, got a DHCP address on the WAN interface (the one mapped to the Realtex adapter on my mainboard), and I could assign an IP to the NIC mapped to my Intel PCI card. After that, I could get to the web interface using the secondary NIC.
Net effect - like others - VBox 5.0.4 will not see (in my case) the add on Network adapter, just the ones on the mainboard. I did use the ndis5 command line switch, which did not help. However, VBox 5.0.2 could see all for network adapters, and use them.
This, of course, for me, is a real dissappointment, b/c I would really like to upgrade my Win7 PC to Win10, but alas .. one must wait for these things to be worked. Go Oracle Go!!! And thank you for releasing this software.
Re: No bridged mode with 5.0.4 on Windows 7
I have an additional: the guests can ping each other too.enzo1982 wrote:I can confirm this issue and add some more details:
While the host and guest cannot reach each other on the network, both can reach any other devices. For example, I can ping my router and my mobile phone from a guest.
Back to 5.0.2 and what: "business as usual" - this threat made my day, thanks a lot
(Host: W7_64, Guests: XP, W7_32)
-
- Posts: 1
- Joined: 25. Sep 2015, 05:07
Re: No bridged mode with 5.0.4 on Windows 7
Wow, this is a pretty big bug. I spent a couple hours trying to figure out what the heck was wrong since I could communicate from guests to the outside world and between guests and other devices on the local network, but just not between the host and guests. Rolling back to 5.0.2 fixed it for me too.
On another note, going to v5.x from v4.x is causing some odd numlock issues. My numlock status keeps turning off when a guest VM is in focus and then back on when it loses focus. I don't remember that happening with v4.x.
On another note, going to v5.x from v4.x is causing some odd numlock issues. My numlock status keeps turning off when a guest VM is in focus and then back on when it loses focus. I don't remember that happening with v4.x.
-
- Posts: 11
- Joined: 18. Sep 2014, 15:49
- Primary OS: MS Windows 7
- VBox Version: PUEL
- Guest OSses: All Windows
- Location: France
Re: No bridged mode with 5.0.4 on Windows 7
Yes I have also this numlock issue!number_one wrote: On another note, going to v5.x from v4.x is causing some odd numlock issues. My numlock status keeps turning off when a guest VM is in focus and then back on when it loses focus. I don't remember that happening with v4.x.
Re: No bridged mode with 5.0.4 on Windows 7
VirtualBox-x.x.x-yyyyy-Win.exe -msiparams NETWORKTYPE=NDIS5 doesn't work for me. When I start the VM it says the network adapter can't be found. I have downgraded to 5.0.2 and all is well.
Re: No bridged mode with 5.0.4 on Windows 7
Unticking the "Kaspersky Anti-Virus NDIS6 Filter" component in the host network adapter properties (and pressing OK) helped me to resolve this issue.
Ticking it back and pressing OK again surprisingly didn't bring the problem back.
It is possible that just opening your host network adapter properties, changing anything there, and then pressing OK is the workaround.
Ticking it back and pressing OK again surprisingly didn't bring the problem back.
It is possible that just opening your host network adapter properties, changing anything there, and then pressing OK is the workaround.
Re: No bridged mode with 5.0.4 on Windows 7
maybe if you do not have kaspersky you are not able to use this workaround isn't it..?
Re: No bridged mode with 5.0.4 on Windows 7
Maybe. Or maybe not:Giusi wrote:maybe if you do not have kaspersky you are not able to use this workaround isn't it..?
Will try it next time I reboot my host, which is not going to happen soon though.Spirit-RC wrote:It is possible that just opening your host network adapter properties, changing anything there, and then pressing OK is the workaround.
Re: No bridged mode with 5.0.4 on Windows 7
The 5.0.6 update resolved this for me. I can now connect to my guests again (Windows 10 in this case which had the bridged mode connection problems under 5.0.4)
Re: No bridged mode with 5.0.4 on Windows 7
Update 5.0.5 r103033Semprini wrote:The 5.0.6 update resolved this for me. I can now connect to my guests again (Windows 10 in this case which had the bridged mode connection problems under 5.0.4)
/wiki/Testbuilds
did the trick as well for me ( whereas i run it on a Windows 7 host )