Discussion of Problems due to Hardened Security

Discussions related to using VirtualBox on Windows hosts.

Re: Discussion of Problems due to Hardened Security

Postby JPagan » 14. Sep 2016, 17:41

mpack wrote:@JPagan: Cylance protect? Sounds like a good candidate.

Is your company aware that Win10 has fairly decent AV built in? Cylance Protect may not be what causes your problem, but I think it's certainly worth testing what happens if it's disabled.


@mpack - Thanks for the info. Yes, I have Cylance Protect installed by my IT. I will have to look into that.
JPagan
 
Posts: 3
Joined: 9. Sep 2016, 22:21

Re: Discussion of Problems due to Hardened Security

Postby ATS2016 » 16. Sep 2016, 22:52

Hello Everyone,

I am running Windows 10 Home Version 1607. And, using VirtualBox 5.1.6. I have tried to start VirtualBox, but continue to get a rc=-5640 error. I am only using Windows Defender, and have searched high and low for a solution. I would greatly appreciate any help that can be provided.

Here is the log.

VBoxHardeningLog.zip
(9.38 KiB) Downloaded 20 times
ATS2016
 
Posts: 1
Joined: 16. Sep 2016, 22:44

Re: Discussion of Problems due to Hardened Security

Postby mpack » 17. Sep 2016, 09:50

@ATS2016: are you using some kind kind of accessibility software on your host? The problem seems to be many instances of "OLEACCHOOKS.DLL", which as best I can tell has to do with hooking software calls to add accessibility features. Unfortunately your copy of "OLEACCHOOKS.DLL" is unsigned.

You could also be suffering with malware which is piggybacking on this feature. You should check if your copy of the above DLL (it is in \SYSTEM32) has a timestamp and security stamp consistent with your other system DLLs.
mpack
Site Moderator
 
Posts: 29843
Joined: 4. Sep 2008, 17:09
Primary OS: MS Windows 10
VBox Version: PUEL
Guest OSses: Mostly XP

Re: Discussion of Problems due to Hardened Security

Postby szgz » 19. Sep 2016, 08:31

OS: Window 7 profession X64
Virus software: MSE
Firewall: Microsoft windows firewall

1. install VirtualBox 5.0.0 , use ok.
2. Add a SSD hard disk, move boot partition (disk c) to SSD
3. OS and other softwares are ok, but virtualBox isn't ok.
4. Remove VirtualBox
5. reboot OS
6. reinstall VirtualBox 5.0.0, worked ok.
7. reboot OS, virtualbox didn't work, error.
8. reinstall VirtualBox 5.1.6, worked ok.
9. reboot OS, virtualbox didn't work, error.
Attachments
VBoxHardening.zip
VBoxHardening.log
(8.73 KiB) Downloaded 23 times
szgz
 
Posts: 1
Joined: 19. Sep 2016, 08:23

Re: Discussion of Problems due to Hardened Security

Postby sau » 23. Sep 2016, 10:27

updating to the latest (5.1.6) just fixed it for me :D despite the changelog not containing anything related to this issue.
sau
 
Posts: 4
Joined: 6. Sep 2016, 10:19

Re: Discussion of Problems due to Hardened Security

Postby forge33 » 23. Sep 2016, 16:04

The 5.1.6 Update also fixed it for me
forge33
 
Posts: 2
Joined: 12. Sep 2016, 17:50

Re: Discussion of Problems due to Hardened Security

Postby HideData(Ha...) » 1. Oct 2016, 11:20

Virtual Box Version: 5.1.7.
OS: Win10-x64
IME:Chinese

I get "Error in supr3hardenedwinrespawn" erery time when start vm.
But I can restart Virtual Box and start vm after restarting The Process of IME.
Why????
HideData(Ha...)
 
Posts: 1
Joined: 1. Oct 2016, 10:27

Re: Discussion of Problems due to Hardened Security

Postby TDH Challenger » 5. Oct 2016, 11:51

Host OS: Windows 7 Ultimate, 64bit
Host AV: Free Avast

What I'm doing:
Install a Windows 2012 R2 server as a requirement due tomorrow. Several times I created a machine set as Windows 64bit (Other), but after clicking start I always get this error:

"Failed to open a session for the virtual machine 4HGrp9PC.

The virtual machine '4HGrp9PC' has terminated unexpectedly during startup with exit code 1 (0x1). More details may be available in 'C:\Users\admin\VirtualBox VMs\4HGrp9PC\Logs\VBoxHardening.log'.

Result Code: E_FAIL (0x80004005)
Component: MachineWrap
Interface: IMachine {b2547866-a0a1-4391-8b86-6952d82efaa0}"


What I have tried:
-Uninstall and Resinstall as admin
-Disabling my AV

I will be eternally grateful if someone could at the very least offer me additional solutions so I can resolve this matter, thank you very much
Attachments
VBoxHardening.rar
Attachment
(16.78 KiB) Downloaded 14 times
TDH Challenger
 
Posts: 1
Joined: 5. Oct 2016, 11:30

Common problem after AU Update?

Postby basty_goofy » 5. Oct 2016, 19:00

Hello, I seem to have this relatively common problem after the update. No VM can start at all. Not even a headless start. Or perhaps it has nothing to do with the update, but it doesn't matter, because I am at my wit's end.

Failed to open a session for the virtual machine d.

The virtual machine 'd' has terminated unexpectedly during startup with exit code -1073741819 (0xc0000005).
Result Code: E_FAIL (0x80004005)
Component: MachineWrap
Interface: IMachine {b2547866-a0a1-4391-8b86-6952d82efaa0}
Attachments
VBoxHardening.log
(19.44 KiB) Downloaded 18 times
basty_goofy
 
Posts: 3
Joined: 5. Oct 2016, 18:55

Re: Discussion of Problems due to Hardened Security

Postby JWIN » 5. Oct 2016, 19:09

VirtualBox: 5.1.6 (Previously 5.0)
Host OS: Windows 10 64bit
Windows Firewall

I have always been in Windows 10 using VirtualBox 5.0. I recently encountered an error that will not allow me to start any of my VMs. I upgraded to 5.1.6 and installed the extension pack just in case. I still receive the following error:

The virtual machine 'VM NAME' has terminated unexpectedly during startup with exit code 1 (0x1). More details may be available in 'D:\STRS VMs\STRS-DC\Logs\VBoxHardening.log'.

Result Code:
E_FAIL (0x80004005)
Component: MachineWrap
Interface: IMachine {b2547866-a0a1-4391-8b86-6952d82efaa0}
Attachments
VBoxHardening Log.zip
VBoxHardening Log
(12.72 KiB) Downloaded 17 times
JWIN
 
Posts: 1
Joined: 5. Oct 2016, 19:03

Re: Common problem after AU Update?

Postby socratis » 5. Oct 2016, 20:18

@basty_goofy
Disable the real-time scan of Malware Antivirus (if it has any), disable it, or uninstall it altogether.
basty_goofy wrote:I seem to have this relatively common problem after the update.
I think it's not related to the Anniversary Update, but due to the antivirus. That is why I'm "merging" your question and my reply with the Discussion of Problems due to Hardened Security.
If you obfuscate any information requested, I will obfuscate my response. These are virtual UUIDs, not real ones.
Do NOT reply with the "QUOTE" button, please use the "POST REPLY", at the bottom of the form.
socratis
Site Moderator
 
Posts: 26078
Joined: 22. Oct 2010, 11:03
Location: Greece
Primary OS: Mac OS X other
VBox Version: PUEL
Guest OSses: Win(*>98), Linux*, OSX>10.5

Re: Discussion of Problems due to Hardened Security

Postby basty_goofy » 5. Oct 2016, 20:27

I did pretty much everything suggested, including disabling Windows Defender (my only antivirus). Oh well... :(
basty_goofy
 
Posts: 3
Joined: 5. Oct 2016, 18:55

Re: Discussion of Problems due to Hardened Security

Postby Veritas1980 » 5. Oct 2016, 21:15

I am having the same problems here, but I cannot remove my antivirus, its malware-bytes. I've disabled it so its not running, no windows defender. the log file is too huge it wont let me attach it.

I'm in windows 7 ultimate 64bit, running virtualbox as administrator.

getting the same error with another OS

Failed to open a session for the virtual machine CentOS-6.6-x86_64-minimal.

The virtual machine 'CentOS-6.6-x86_64-minimal' has terminated unexpectedly during startup with exit code 1 (0x1). More details may be available in 'C:\Users\Owner\VirtualBox VMs\CentOS-6.6-x86_64-minimal\Logs\VBoxHardening.log'.

Result Code: E_FAIL (0x80004005)
Component: MachineWrap
Interface: IMachine {b2547866-a0a1-4391-8b86-6952d82efaa0}

uninstalled and installed 5.0.26 instead and loaded a bit image since I didn't want to reboot and enable virtualization in the Bios, got this when trying to start it:

Failed to open a session for the virtual machine CentOS-6.5-i386-minimal.

Implementation of the USB 2.0 controller not found!

Because the USB 2.0 controller state is part of the saved VM state, the VM cannot be started. To fix this problem, either install the 'Oracle VM VirtualBox Extension Pack' or disable USB 2.0 support in the VM settings.

Note! This error could also mean that an incompatible version of the 'Oracle VM VirtualBox Extension Pack' is installed (VERR_NOT_FOUND).

Result Code: E_FAIL (0x80004005)
Component: ConsoleWrap
Interface: IConsole {872da645-4a9b-1727-bee2-5585105b9eed}

turned off USB and it started. Is the newest version of VB just broken?
Attachments
virtualbox error.jpg
screenshot
virtualbox error.jpg (80.09 KiB) Viewed 2638 times
Veritas1980
 
Posts: 1
Joined: 5. Oct 2016, 21:12

Re: Discussion of Problems due to Hardened Security

Postby basty_goofy » 5. Oct 2016, 21:40

Disabling USB does nothing, sadly.
So far nothing has worked:

1. Re-installing (in different folders)
2. Upgrading
3. Enabling and disabling Hyper-V
4. Disabling Defender
5. Removing Malware-Bytes
basty_goofy
 
Posts: 3
Joined: 5. Oct 2016, 18:55

Re: Discussion of Problems due to Hardened Security

Postby socratis » 5. Oct 2016, 23:10

basty_goofy wrote:Disabling USB does nothing, sadly.

Of course it wouldn't! It would be as much help as if were to eat an apple. Completely unrelated!
Now that you have uninstalled your antivirus, please post a new log. You should do that whenever some major change takes place. But before you do that, open an administrator Command Prompt (right-click, run as administrator) and run "sfc /scannnow". See if it helps. If it doesn't, post the log.
If you obfuscate any information requested, I will obfuscate my response. These are virtual UUIDs, not real ones.
Do NOT reply with the "QUOTE" button, please use the "POST REPLY", at the bottom of the form.
socratis
Site Moderator
 
Posts: 26078
Joined: 22. Oct 2010, 11:03
Location: Greece
Primary OS: Mac OS X other
VBox Version: PUEL
Guest OSses: Win(*>98), Linux*, OSX>10.5

PreviousNext

Return to VirtualBox on Windows Hosts

Who is online

Users browsing this forum: pt58 and 55 guests