Enable PXE with NAT for WDS
Posted: 26. Jan 2011, 16:16
Hello,
I know there is a lot a conversation about this subject, but i did'nt find a good answer.So,
I have a WDS Server (2008R2) with the default configuration of NAT. (IP:10.0.2.15)
And i want create another machine in the same network (ex 10.0.2.16) on NAT. And this machine would have the boot pxe enable.
When i try to start my machine, with the default configutation of NAT i have this message :
FATAL: Could not read from the boot medium! System halted.
So i have try this :
Put 2 network cards and this is my result:
the first is PCnet-PCI II and the second is Intel PRO/1000 MT Desktop
And i have this message :
Searching for servers (DHCP)....
Me: 10.0.2.15, DHCP: 10.0.2.2, Gateway 10.0.2.2
Loading 10.0.2.4:Windows 7 WDS.pxe .TFTP error 1 (File not found)
Unable to load file.
FATAL: Could not read from the boot medium! System halted.
Can you help me please :p
I know there is a lot a conversation about this subject, but i did'nt find a good answer.So,
I have a WDS Server (2008R2) with the default configuration of NAT. (IP:10.0.2.15)
And i want create another machine in the same network (ex 10.0.2.16) on NAT. And this machine would have the boot pxe enable.
When i try to start my machine, with the default configutation of NAT i have this message :
FATAL: Could not read from the boot medium! System halted.
So i have try this :
Put 2 network cards and this is my result:
the first is PCnet-PCI II and the second is Intel PRO/1000 MT Desktop
And i have this message :
Searching for servers (DHCP)....
Me: 10.0.2.15, DHCP: 10.0.2.2, Gateway 10.0.2.2
Loading 10.0.2.4:Windows 7 WDS.pxe .TFTP error 1 (File not found)
Unable to load file.
FATAL: Could not read from the boot medium! System halted.
Can you help me please :p