macOS Monterey crush when more then 1 CPU

Discussions related to using VirtualBox on Windows hosts.
Locked
SaintPath
Posts: 1
Joined: 13. Jan 2022, 17:23

macOS Monterey crush when more then 1 CPU

Post by SaintPath »

every time I'm trying to put more than 1 CPU the machine is not working.
I tried reinstalling it couple of times, did the CMD commands that needed every time...

I have:
intel i7-6700HQ 2.6
16GB ram
64-bit OS windows 10


00:02:23.792900 ********************* End of statistics **********************
00:02:23.793111 VUSB: Detached 'HidKeyboard' from port 1 on RootHub#1
00:02:23.793384 VUSB: Detached 'HidMouse' from port 2 on RootHub#1
00:02:23.818448 NAT: Zone(nm:mbuf_cluster, used:0)
00:02:23.819068 NAT: Zone(nm:mbuf_packet, used:0)
00:02:23.819087 NAT: Zone(nm:mbuf, used:0)
00:02:23.819231 NAT: Zone(nm:mbuf_jumbo_pagesize, used:0)
00:02:23.819688 NAT: Zone(nm:mbuf_jumbo_9k, used:0)
00:02:23.820193 NAT: Zone(nm:mbuf_jumbo_16k, used:0)
00:02:23.820460 NAT: Zone(nm:mbuf_ext_refcnt, used:0)
00:02:23.821054 E1000#0: Interrupt attempts: 0
00:02:23.821065 E1000#0: Interrupts raised : 0
00:02:23.821073 E1000#0: Interrupts lowered: 0
00:02:23.821080 E1000#0: ICR outside ISR : 0
00:02:23.821088 E1000#0: IMS raised ints : 0
00:02:23.821095 E1000#0: Interrupts skipped: 0
00:02:23.821103 E1000#0: Masked interrupts : 0
00:02:23.821110 E1000#0: Early interrupts : 0
00:02:23.821118 E1000#0: Late interrupts : 0
00:02:23.821125 E1000#0: Lost interrupts : 0
00:02:23.821133 E1000#0: Interrupts by RX : 0
00:02:23.821141 E1000#0: Interrupts by TX : 0
00:02:23.821148 E1000#0: Interrupts by ICS : 0
00:02:23.821155 E1000#0: Interrupts by RDTR: 0
00:02:23.821163 E1000#0: Interrupts by RDMT: 0
00:02:23.821175 E1000#0: Interrupts by TXQE: 0
00:02:23.821183 E1000#0: TX int delay asked: 0
00:02:23.821196 E1000#0: TX delayed: 0
00:02:23.821207 E1000#0: TX delay expired: 0
00:02:23.821215 E1000#0: TX no report asked: 0
00:02:23.821222 E1000#0: TX abs timer expd : 0
00:02:23.821229 E1000#0: TX int timer expd : 0
00:02:23.821237 E1000#0: RX abs timer expd : 0
00:02:23.821244 E1000#0: RX int timer expd : 0
00:02:23.821252 E1000#0: TX CTX descriptors: 0
00:02:23.821259 E1000#0: TX DAT descriptors: 0
00:02:23.821267 E1000#0: TX LEG descriptors: 0
00:02:23.821274 E1000#0: Received frames : 0
00:02:23.821282 E1000#0: Transmitted frames: 0
00:02:23.821289 E1000#0: TX frames up to 1514: 0
00:02:23.821297 E1000#0: TX frames up to 2962: 0
00:02:23.821305 E1000#0: TX frames up to 4410: 0
00:02:23.821312 E1000#0: TX frames up to 5858: 0
00:02:23.821319 E1000#0: TX frames up to 7306: 0
00:02:23.821327 E1000#0: TX frames up to 8754: 0
00:02:23.821334 E1000#0: TX frames up to 16384: 0
00:02:23.821342 E1000#0: TX frames up to 32768: 0
00:02:23.821349 E1000#0: Larger TX frames : 0
00:02:23.821357 E1000#0: Max TX Delay : 0
00:02:23.825164 NEM: Destroying partition 00000000019baca0 with its 4 VCpus...
00:02:23.829080 Changing the VM state from 'DESTROYING' to 'TERMINATED'
00:02:23.836601 Console: Machine state changed to 'PoweredOff'
00:02:24.401524 GUI: Passing request to close Runtime UI from machine-logic to UI session.


Thank you for your time
scottgus1
Site Moderator
Posts: 20965
Joined: 30. Dec 2009, 20:14
Primary OS: MS Windows 10
VBox Version: PUEL
Guest OSses: Windows, Linux

Re: macOS Monterey crush when more then 1 CPU

Post by scottgus1 »

I'm not clear on why that particular part of the log was chosen for posting, instead of the whole log, zipped, using the forum's Upload Attachment tab.

But, a Mac guest OS is only allowed if the physical computer is an Apple computer. OSX guests on non-Apple hardware

If you are using a real Mac, post again on the Mac Guests forum, with a zipped vbox.log:
Please right-click the guest in the main Virtualbox window's guest list, choose Show Log. Save the far left tab's log, zip the log file, and post the zip file, using the forum's Upload Attachment tab.
Locked