i faced network interface error. how to resolve this issue?
quite urgent and need to use vm urgently
Could not start the machine VM Clone 25 Oct 21 because the following physical network interfaces were not found:
Qualcomm Atheros QCA9377 Wireless Network Adapter (adapter 1)
You can either change the machine's network settings or stop the machine.
network interface issue URGENT
-
- Volunteer
- Posts: 5105
- Joined: 19. Sep 2009, 04:44
- Primary OS: MS Windows 10
- VBox Version: PUEL
- Guest OSses: Windows 10,7 and earlier
- Location: Sydney, Australia
Re: network interface issue URGENT
Nobody can fix that for you - you will need to do it yourself. We have no idea what network adapters your host machine has.
Have you moved this vm from some other machine? Are you using Bridged mode for the network setting? Check what options are available in the dropdown list.
Best to do this while the vm is shut down. You can only bridge to an adapter which is available to you.
Have you moved this vm from some other machine? Are you using Bridged mode for the network setting? Check what options are available in the dropdown list.
Best to do this while the vm is shut down. You can only bridge to an adapter which is available to you.
Bill
Re: network interface issue URGENT
Hi,
I clone the vm from another virtualbox.
Import to ova is not working hence i use clone method.
Do i need to use the same network adapter from the original vm?
I tried all the options for all network adapter. The OK button was greyed out. I cannot select all network adapters.
I clone the vm from another virtualbox.
Import to ova is not working hence i use clone method.
Do i need to use the same network adapter from the original vm?
I tried all the options for all network adapter. The OK button was greyed out. I cannot select all network adapters.
-
- Site Moderator
- Posts: 20945
- Joined: 30. Dec 2009, 20:14
- Primary OS: MS Windows 10
- VBox Version: PUEL
- Guest OSses: Windows, Linux
Re: network interface issue URGENT
In your VM's network adapter settings, change the "Name:" dropdown, as shown in Bill's screenshot, to the physical network adapter on your host PC that is connected to the network. Note that Bridged does not always work with Wi-Fi.
Re: network interface issue URGENT
Hi,
For the network adapter. It is using the correct network adapter.
I need help and advice.
Need to disable acceleration under system in order to start the VM.
I am using Window 7. I unable to disbale the acceleration and "ok"
button greyed out.
Really need help urgently.
For the network adapter. It is using the correct network adapter.
I need help and advice.
Need to disable acceleration under system in order to start the VM.
I am using Window 7. I unable to disbale the acceleration and "ok"
button greyed out.
Really need help urgently.
-
- Site Moderator
- Posts: 20945
- Joined: 30. Dec 2009, 20:14
- Primary OS: MS Windows 10
- VBox Version: PUEL
- Guest OSses: Windows, Linux
Re: network interface issue URGENT
This is a different problem than the network problem above. It appears that the host's "Virtualization Technology" is not enabled. See I have a 64bit host, but can't install 64bit guests post #1.Yo wrote:Need to disable acceleration under system in order to start the VM.
I am using Window 7. I unable to disbale the acceleration and "ok" button greyed out.
Re: network interface issue URGENT
Hi,
I managed to start the V!M. Installed older version and it works.
I managed to start the V!M. Installed older version and it works.
-
- Site Moderator
- Posts: 20945
- Joined: 30. Dec 2009, 20:14
- Primary OS: MS Windows 10
- VBox Version: PUEL
- Guest OSses: Windows, Linux
Re: network interface issue URGENT
I think it was 6.1.x that removed the ability to run VMs without "Virtualization Technology" enabled on the host. So if you went back to 6.0 or earlier, then the VM would run.
Did following the 64 bits tutorial not work?
Did following the 64 bits tutorial not work?
Re: network interface issue URGENT
Hi,
For this case, it did not work. I had done a search. install build 6.0 will helps as build 6.1 had removed alot of settings.
For this case, it did not work. I had done a search. install build 6.0 will helps as build 6.1 had removed alot of settings.
Re: network interface issue URGENT
Thanks scottgus1 for helping out and do a search on the issue
Thanks everyone for the help and advices.
Greatly appreciated!
Thanks everyone for the help and advices.
Greatly appreciated!