Gast startet nicht mit grafischer Oberfläche

Allgemeine Diskussionen über den Einsatz von VirtualBox.
Post Reply
andreas_stoeffer
Posts: 8
Joined: 7. Nov 2007, 21:15

Gast startet nicht mit grafischer Oberfläche

Post by andreas_stoeffer »

Hallo,

unter Version 1.5.2 zeigt sich Folgendes:

WindowsXP als Gast startet mit dem Befehl "VBoxSDL -vm WindowsXP" problemlos. Versuche ich das Gleiche aus der grafischen Oberfläche von VrtualBox, "blitzt" es nur kurz und dann bricht der Vorgang ab.

Ich nutze derzeit Debian etch 4.0

HIer ein Auszug aus dem Log File:
00:03:29.388 Guest CPUM state: se
00:03:29.388 eax=000047f3 ebx=ffdff000 ecx=ffdffc50 edx=00000000 esi=80559320 edi=80559580
00:03:29.388 eip=806f472a esp=805508d4 ebp=ffdff980 iopl=0 rf nv up ei pl zr ac pe cy
00:03:29.388 cs={0008 base=00000000 limit=ffffffff flags=0000c09a} dr0=00000000 dr1=00000000
00:03:29.388 ds={0023 base=00000000 limit=ffffffff flags=0000c0f3} dr2=00000000 dr3=00000000
00:03:29.388 es={0023 base=00000000 limit=ffffffff flags=0000c0f3} dr4=00000000 dr5=00000000
00:03:29.388 fs={0030 base=ffdff000 limit=00001fff flags=0000c093} dr6=ffff0ff0 dr7=00000400
00:03:29.388 gs={0000 base=00000000 limit=0000ffff flags=00000000} cr0=e001003b cr2=806f5ba8
00:03:29.388 ss={0010 base=00000000 limit=ffffffff flags=0000c093} cr3=00039000 cr4=00000699
00:03:29.388 gdtr=8003f000:03ff idtr=8003f400:07ff eflags=00010213
00:03:29.388 ldtr={0000 base=00000000 limit=00000000 flags=00000080}
00:03:29.388 tr ={0028 base=80042000 limit=000020ab flags=00000089}
00:03:29.388 SysEnter={cs=0000 eip=00000000 esp=00000000}
00:03:29.388 FPU:
00:03:29.388 FCW=027f FSW=0000 FTW=00
00:03:29.388 res1=00 FOP=0000 FPUIP=00000000 CS=0000 Rsvrd1=0000
00:03:29.388 FPUDP=14aff0c DS=0000 Rsvrd2=0000 MXCSR=00001f80 MXCSR_MASK=0000ffff
00:03:29.388 ***
00:03:29.388 Guest paging mode: 32-bit, changed 1752 times, A20 enabled
00:03:29.388 Shadow paging mode: 32-bit
00:03:29.388 Host paging mode: 32-bit+G
00:03:29.388 ***
00:03:29.388 Active Timers (pVM=b408c000)
00:03:29.388 pTimerR3 offNext offPrev offSched Clock Time Expire State Description
00:03:29.388 b3cdc9b0 000352e0 00000000 00000000 Real 000000017181121397 000000017181121399 ACTIVE VGA Refresh Timer
00:03:29.388 b3d11c90 00000000 fffcad20 00000000 Real 000000017181121397 000000017181121420 ACTIVE EMT Yielder
00:03:29.388 b3cd9780 00000000 00000000 00000000 Virt 000000208125153224 000000208128014558 ACTIVE PDM Poller
00:03:29.388 b3cdb600 00000320 00000000 00000000 VrSy 000000208091948948 000000208098543544 ACTIVE i8254 Programmable Interval Timer
00:03:29.388 b3cdb920 00035d30 fffffce0 00000000 VrSy 000000208091966318 000000208990000000 ACTIVE MC146818 RTC/CMOS - Second
00:03:29.389 b3d11650 00000000 fffca2d0 00000000 VrSy 000000208091983487 000001199864031601 ACTIVE ACPI Timer
00:03:29.389 ***
00:03:29.389 Shadow GDT (GCAddr=f729d000):
00:03:29.389 0008 - 0000ffff 00cfbb00 - base=00000000 limit=ffffffff dpl=1 CodeER Accessed Present Page 32-bit
00:03:29.389 0010 - 0000ffff 00cfb300 - base=00000000 limit=ffffffff dpl=1 DataRW Accessed Present Page 32-bit
00:03:29.389 0018 - 0000ffff 00cffb00 - base=00000000 limit=ffffffff dpl=3 CodeER Accessed Present Page 32-bit
00:03:29.389 0020 - 0000ffff 00cff300 - base=00000000 limit=ffffffff dpl=3 DataRW Accessed Present Page 32-bit
00:03:29.389 0030 - f0000001 ffc0b3df - base=ffdff000 limit=00001fff dpl=1 DataRW Accessed Present Page 32-bit
00:03:29.389 0038 - 00000fff 0040f300 - base=00000000 limit=00000fff dpl=3 DataRW Accessed Present 32-bit
00:03:29.389 0040 - 0400ffff 0000f300 - base=00000400 limit=0000ffff dpl=3 DataRW Accessed Present 16-bit
00:03:29.389 0060 - 2f30ffff 0000b302 - base=00022f30 limit=0000ffff dpl=1 DataRW Accessed Present 16-bit
00:03:29.389 0068 - 80003fff 0000b30b - base=000b8000 limit=00003fff dpl=1 DataRW Accessed Present 16-bit
00:03:29.389 0070 - 700003ff ff00b3ff - base=ffff7000 limit=000003ff dpl=1 DataRW Accessed Present 16-bit
00:03:29.389 0078 - 0000ffff 8000bb40 - base=80400000 limit=0000ffff dpl=1 CodeER Accessed Present 16-bit
00:03:29.389 0080 - 0000ffff 8000b340 - base=80400000 limit=0000ffff dpl=1 DataRW Accessed Present 16-bit
00:03:29.389 0088 - 00000000 0000b300 - base=00000000 limit=00000000 dpl=1 DataRW Accessed Present 16-bit
00:03:29.389 00e8 - 0000ffff 0000b300 - base=00000000 limit=0000ffff dpl=1 DataRW Accessed Present 16-bit
00:03:29.389 00f0 - 8b28cf7b 8003b94d - base=804d8b28 limit=0003cf7b dpl=1 CodeEO Accessed Present 16-bit
00:03:29.389 00f8 - 0000ffff 0000b300 - base=00000000 limit=0000ffff dpl=1 DataRW Accessed Present 16-bit
00:03:29.389 ffd8 - 06080087 f7008901 - base=f7010608 limit=00000087 dpl=0 TSS32Avail Present 16-bit HyperTSSTrap08
00:03:29.389 ffe0 - 05800087 f7008b01 - base=f7010580 limit=00000087 dpl=0 TSS32Busy Present 16-bit HyperTSS
00:03:29.389 ffe8 - 0000ffff 00af9b00 - base=00000000 limit=ffffffff dpl=0 CodeER Accessed Present Page 16-bit HyperCS64
00:03:29.389 fff0 - 0000ffff 00cf9300 - base=00000000 limit=ffffffff dpl=0 DataRW Accessed Present Page 32-bit HyperDS
00:03:29.389 fff8 - 0000ffff 00cf9b00 - base=00000000 limit=ffffffff dpl=0 CodeER Accessed Present Page 32-bit HyperCS
00:03:29.389 ***
00:03:29.389 ************** End of Guest state at power off ***************
00:03:29.389 Changing the VM state from 'RUNNING' to 'OFF'.
00:03:29.389 Changing the VM state from 'OFF' to 'DESTROYING'.
00:03:29.389 ************************* Statistics *************************
00:03:29.389 /Devices/ATA0/Unit0/AtapiDMA 0 times
00:03:29.389 /Devices/ATA0/Unit0/AtapiPIO 0 times
00:03:29.389 /Devices/ATA0/Unit0/DMA 4140 times
00:03:29.389 /Devices/ATA0/Unit0/PIO 1696 times
00:03:29.389 /Devices/ATA0/Unit1/AtapiDMA 0 times
00:03:29.389 /Devices/ATA0/Unit1/AtapiPIO 0 times
00:03:29.389 /Devices/ATA0/Unit1/DMA 0 times
00:03:29.389 /Devices/ATA0/Unit1/PIO 0 times
00:03:29.389 /Devices/ATA1/Unit0/AtapiDMA 29 times
00:03:29.389 /Devices/ATA1/Unit0/AtapiPIO 34 times
00:03:29.389 /Devices/ATA1/Unit0/DMA 0 times
00:03:29.389 /Devices/ATA1/Unit0/PIO 0 times
00:03:29.389 /Devices/ATA1/Unit1/AtapiDMA 0 times
00:03:29.389 /Devices/ATA1/Unit1/AtapiPIO 0 times
00:03:29.389 /Devices/ATA1/Unit1/DMA 0 times
00:03:29.389 /Devices/ATA1/Unit1/PIO 0 times
00:03:29.389 /MM/HyperHeap/cbFree 798912 bytes
00:03:29.389 /MM/HyperHeap/cbHeap 1310656 bytes
00:03:29.389 /PGM/cGuestModeChanges 1752 times
00:03:29.389 /PROF/EM/Halted 7628693 ticks/call (149453742525 ticks, 19591 times, max 114566565, min 90)
00:03:29.389 /PROF/EM/Total 184004952694 ticks/call (184004952694 ticks, 1 times, max 184004952694, min 184004952694)
00:03:29.389 /PROF/VM/Halt/Block 1984995 ticks/call (144527506989 ticks, 72810 times, max 114430389, min 7381)
00:03:29.389 /PROF/VM/Halt/Poll 14847 ticks/call ( 3339782898 ticks, 224934 times, max 86401489, min 8912)
00:03:29.389 /PROF/VM/Halt/Timers 5765 ticks/call ( 1296818586 ticks, 224934 times, max 12984776, min 1127)
00:03:29.389 /PROF/VM/Halt/Yield 0 ticks/call ( 0 ticks, 0 times, max 0, min -1)
00:03:29.389 /TM/VirtualSync/CurrentOffset 33203612 ns
00:03:29.389 ********************* End of statistics **********************
00:03:29.503 Changing the VM state from 'DESTROYING' to 'TERMINATED'.
00:03:29.569 vboxClipboardDestroy: shutting down host clipboard
00:03:29.658 vboxClipboardThread: clipboard thread terminated successfully with return code VINF_SUCCESS
00:03:29.920 ERROR [COM]: aRC=0x8000ffff aIID={09789f63-4525-48e5-a5e4-1080453b0eab} aComponent={Display} aText={The object is not ready} aPreserve=false

Hat jemand eine Idee?

Grüße
Andreas
andreas_stoeffer
Posts: 8
Joined: 7. Nov 2007, 21:15

Gast startet nicht mit grafischer Oberfläche

Post by andreas_stoeffer »

Hallo,

unter RedHat EL5 dasselbe Verhalten.

Gruß
Andreas
andreas_stoeffer
Posts: 8
Joined: 7. Nov 2007, 21:15

Gast startet nicht

Post by andreas_stoeffer »

Hallo und guten Morgen,

hat keiner eine Idee?

Gruß und schönes Wochenende
Andreas
andreas_stoeffer
Posts: 8
Joined: 7. Nov 2007, 21:15

[Gelöst] Gast startet nicht mit grafischer Oberfläche

Post by andreas_stoeffer »

So nun schließe ich meinen Thread :-)

Es muss irgendetwas mit den .qt Einstellungen zu tun haben. Nachdem ich diese Einstellungen gelöscht habe, gings.

Das erste Mal "seamless" auf meinem "Debian etch" Laptop.
Der Wahnsinn.

Danke an alle die in den vergangenen Tagen hier vorbegekommen sind.

Wenn die Entwickler interesse an meinen .qt Einstellungen haben, die für die Abstürze verantworlich waren.
Ich habe sie noch und kann Sie Euch zukommen lassen.

Gruß
Andreas
Post Reply