VM stuck on accessing parallel port
-
- Posts: 86
- Joined: 1. May 2016, 06:40
- Primary OS: MS Windows other
- VBox Version: OSE other
- Guest OSses: WIN XP
- Location: Berlin
Re: Drucker in VM
Good. Are you able to share the printer onto the network? yes
And we still need to know the "ipconfig /all" from the VM. yes
Kann die VM nicht starten, bekomme die Fehlermeldung wie beschrieben.
And we still need to know the "ipconfig /all" from the VM. yes
Kann die VM nicht starten, bekomme die Fehlermeldung wie beschrieben.
Gruss André
-
- Site Moderator
- Posts: 20945
- Joined: 30. Dec 2009, 20:14
- Primary OS: MS Windows 10
- VBox Version: PUEL
- Guest OSses: Windows, Linux
Re: Drucker in VM
Ah, I understand, I'm sorry! The VM cannot start.
If you are still getting this error:
If you are still getting this error:
Then the other VM "DOS-PC" is probably still controlling the parallel port. Is "DOS-PC" running now?HostParallel#0: Could not get direct access to the host parallel port!! (rc=VERR_INTERNAL_ERROR_3) (VERR_INTERNAL_ERROR_3).
Parallel device 0 cannot attach to host driver (VERR_INTERNAL_ERROR_3).
-
- Posts: 86
- Joined: 1. May 2016, 06:40
- Primary OS: MS Windows other
- VBox Version: OSE other
- Guest OSses: WIN XP
- Location: Berlin
-
- Site Moderator
- Posts: 20945
- Joined: 30. Dec 2009, 20:14
- Primary OS: MS Windows 10
- VBox Version: PUEL
- Guest OSses: Windows, Linux
Re: Drucker in VM
André Lieske wrote:my VM is called "FlowFact"
Unfortunately, the information is getting confusing. Do you have a VM called "DOS-PC"? Where did these commands come from?André Lieske wrote: Had previously entered the following code
cmd
cd / (press Enter)
cd c: \ Program Files \ Oracle \ VirtualBox (press
Enter ) VBoxManage modifyvm "DOS-PC" --lptmode1 "LPT1:"
VBoxManage modifyvm "DOS-PC" --lpt1 0x378 7
The error appears to be coming from the Parallel port being wrongly configured or in use by another VM or the host OS.
-
- Posts: 86
- Joined: 1. May 2016, 06:40
- Primary OS: MS Windows other
- VBox Version: OSE other
- Guest OSses: WIN XP
- Location: Berlin
Re: Drucker in VM
bekomme die VM nicht gestartet.
habe es mit
VBoxManage modifyvm "FlowFact" --lptmode1 "LPT1:"
VBoxManage modifyvm "FlowFact" --lpt1 0x378 7
versucht.
habe es mit
VBoxManage modifyvm "FlowFact" --lptmode1 "LPT1:"
VBoxManage modifyvm "FlowFact" --lpt1 0x378 7
versucht.
Gruss André
-
- Site Moderator
- Posts: 20945
- Joined: 30. Dec 2009, 20:14
- Primary OS: MS Windows 10
- VBox Version: PUEL
- Guest OSses: Windows, Linux
Re: Drucker in VM
My suggestion is to not send the printer into the VM through the parallel port. Instead, share the printer from the host OS.
-
- Posts: 86
- Joined: 1. May 2016, 06:40
- Primary OS: MS Windows other
- VBox Version: OSE other
- Guest OSses: WIN XP
- Location: Berlin
Re: Drucker in VM
Ich kann aber die VM nicht öffnen und mit VBoxManage bekomme ich die Einstellung nicht zurück gesetzt
Gruss André
-
- Site Moderator
- Posts: 20945
- Joined: 30. Dec 2009, 20:14
- Primary OS: MS Windows 10
- VBox Version: PUEL
- Guest OSses: Windows, Linux
Re: Drucker in VM
Please post the .vbox file again. The earlier .vbox file did not have any parallel port entries, that I was able to see.
-
- Posts: 86
- Joined: 1. May 2016, 06:40
- Primary OS: MS Windows other
- VBox Version: OSE other
- Guest OSses: WIN XP
- Location: Berlin
Re: Drucker in VM
mache ich
- Attachments
-
- FlowFact-2021-04-12-15-21-30.log
- VBOX.log
- (36.3 KiB) Downloaded 17 times
Gruss André
-
- Site Moderator
- Posts: 20945
- Joined: 30. Dec 2009, 20:14
- Primary OS: MS Windows 10
- VBox Version: PUEL
- Guest OSses: Windows, Linux
Re: Drucker in VM
Thanks, that was the vbox.log file. Please send the .vbox file, like you did in the second attachment "FlowFact.zip" here: viewtopic.php?f=5&t=86057&p=497866#p497807
-
- Posts: 86
- Joined: 1. May 2016, 06:40
- Primary OS: MS Windows other
- VBox Version: OSE other
- Guest OSses: WIN XP
- Location: Berlin
-
- Site Moderator
- Posts: 20945
- Joined: 30. Dec 2009, 20:14
- Primary OS: MS Windows 10
- VBox Version: PUEL
- Guest OSses: Windows, Linux
Re: Drucker in VM
Thanks. This .vbox file contains these lines defining the LPT port:
Reboot the host PC so no Virtualbox processes are running.
Rename the existing "FlowFact.vbox" to "FlowFact.vbox-lpt"
Unzip the below "FlowFact.vbox" and put it in the FlowFact folder next to "FlowFact.vbox-lpt"
Your VM should now start up and not look for the LPT port anymore. You should then be able to get the VM's "ipconfig /all".
I have removed these lines, so the VM should not look for the parallel port anymore. Hopefully this will get the VM running again.<LPT>
<Port slot="0" enabled="true" IOBase="0x378" IRQ="7" path="LPT1:"/>
</LPT>
Reboot the host PC so no Virtualbox processes are running.
Rename the existing "FlowFact.vbox" to "FlowFact.vbox-lpt"
Unzip the below "FlowFact.vbox" and put it in the FlowFact folder next to "FlowFact.vbox-lpt"
Your VM should now start up and not look for the LPT port anymore. You should then be able to get the VM's "ipconfig /all".
- Attachments
-
- FlowFact.vbox no LPT.zip
- (2.23 KiB) Downloaded 25 times
-
- Site Moderator
- Posts: 20945
- Joined: 30. Dec 2009, 20:14
- Primary OS: MS Windows 10
- VBox Version: PUEL
- Guest OSses: Windows, Linux
Re: Drucker in VM
BTW, I was wrong earlier when I said the first .vbox didn't have the LPT instructions. They were there, I didn't notice them before. Sorry!
-
- Posts: 86
- Joined: 1. May 2016, 06:40
- Primary OS: MS Windows other
- VBox Version: OSE other
- Guest OSses: WIN XP
- Location: Berlin
-
- Site Moderator
- Posts: 20945
- Joined: 30. Dec 2009, 20:14
- Primary OS: MS Windows 10
- VBox Version: PUEL
- Guest OSses: Windows, Linux
Re: Drucker in VM
I am afraid I am stumped, then. I don't know what is wrong.
We'll need a forum guru to look more into this. I will move this to Windows Hosts, to get more views.
We'll need a forum guru to look more into this. I will move this to Windows Hosts, to get more views.