Page 1 of 2
[Solved] Trouble Running Guest Only For Netgear Wireless Adapter
Posted: 28. Jun 2019, 23:37
by Tuppo
I am running Linux Mint as a guest on Windows 7 Premium Home, and since Windows 7 will not be supported in January, I want to run the host offline while having the guest remain online. I have been able to create this scenario with a Gigabit USB Ethernet adapter but not with a Netgear USB wireless adapter, because, in the latter case, the guest won't go online independently of the host.
I see nowhere in which I can choose the Netgear device under USB Device filters, but I do see the wired adapter in that list when it's plugged in. Any ideas?
Thank you
Re: Trouble Running Guest Only For Netgear Wireless Adapter
Posted: 28. Jun 2019, 23:54
by socratis
Tuppo wrote:I see nowhere in which I can choose the Netgear device under USB Device filters
What about the output of the command
when run while the Netgear WiFi-to-USB is plugged in? It's a possibility that your host grabs the device and won't let VirtualBox see it.
Tuppo wrote:in the latter case, the guest won't go online independently of the host
So your host uses that device to connect as well? There might be a solution to this by removing all the networking bindings for that adapter, except the VirtualBox NDIS part.
Tuppo wrote:but I do see the wired adapter in that list when it's plugged in
I'm not sure I understand that part. Are you referring to the Ethernet-to-USB adapter?
Re: Trouble Running Guest Only For Netgear Wireless Adapter
Posted: 29. Jun 2019, 00:01
by Tuppo
socratis wrote:I'm not sure I understand that part. Are you referring to the Ethernet-to-USB adapter?
Yes, I'm referring to the Ethernet-to-USB adapter. I think you are right that the host is grabbing the device, but I'm not very technical and have limited experience with Linux Mint, so if there's a work-around through the guest I may not be capable of comprehending instructions.
I think I got a bit too ambitious for my level of experience for this VM project.
Re: Trouble Running Guest Only For Netgear Wireless Adapter
Posted: 29. Jun 2019, 00:50
by Tuppo
I have a feeling this is what you were talking about:
https://kb.vmware.com/s/article/1020359
I tried it. Perhaps I de-selected more than I should. I de-selected all the protocols as well as Client for Microsoft for Microsoft Networks, QoS Package Scheduler, and File and Printer Sharing, but I kept VirtualBox NDIS6 Networking Driver selected, but still guest went offline with the host. Please advise.
Re: Trouble Running Guest Only For Netgear Wireless Adapter
Posted: 29. Jun 2019, 00:59
by socratis
I would prefer it if you had linked to something from the VirtualBox forums, like:
... but the idea is the same, yes.
Tuppo wrote:I kept VirtualBox NDIS6 Networking Driver selected, but still guest went offline with the host
Was the guest able to get an IP before deselecting those options? Does the same procedure work if you use the Ethernet-to-USB option?
Re: Trouble Running Guest Only For Netgear Wireless Adapter
Posted: 29. Jun 2019, 01:25
by Tuppo
Yes, the guest was able to get an IP address before deselecting but not after. The Ethernet-to-USB option test provides no useful information, since the VM recognizes that device.
Re: Trouble Running Guest Only For Netgear Wireless Adapter
Posted: 29. Jun 2019, 01:49
by socratis
Tuppo wrote:The Ethernet-to-USB option test provides no useful information, since the VM recognizes that device.
Are you talking about capturing the device in your VM? Using either a filter or the menu Devices ยป USB? Because that's a completely different technique.
How are you trying to access the network? Via USB capturing, or via Bridged networking?
Re: Trouble Running Guest Only For Netgear Wireless Adapter
Posted: 29. Jun 2019, 02:05
by Tuppo
Let's forget what I'm doing, because it's not working, and why don't you instruct me the best way to proceed to get a guest-only wireless connection with my wireless adapter?
What I've noted is that all my host adapters as well as the USB Ethernet adapter appear in that USB filter options but not this Netgear device, so with that information maybe we can come up with something.
Re: Trouble Running Guest Only For Netgear Wireless Adapter
Posted: 29. Jun 2019, 02:24
by socratis
I asked you for this, never got it:
socratis wrote:What about the output of the command
when run while the Netgear WiFi-to-USB is plugged in? It's a possibility that your host grabs the device and won't let VirtualBox see it.
Re: Trouble Running Guest Only For Netgear Wireless Adapter
Posted: 29. Jun 2019, 02:26
by Tuppo
Is that a terminal command for Linux?
Re: Trouble Running Guest Only For Netgear Wireless Adapter
Posted: 29. Jun 2019, 02:38
by Tuppo
All right, since I don't know much about this stuff, I didn't know if it was a LInux command, so I tried, and it didn't work. Therefore, I went to the DOS prompt in Windows and was able to get what you are after. It's best you assume I'm an idiot if we are going to get anywhere.
:
Code: Select all
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\Nancy>cd "C:\Program Files\Oracle\VirtualBox"
C:\Program Files\Oracle\VirtualBox>VBoxManage list usbhost
Host USB Devices:
UUID: 1e1bbc5e-fbf2-418d-aa0a-a62a1c3c39b1
VendorId: 0x2222 (2222)
ProductId: 0x2520 (2520)
Revision: 34.81 (3481)
Port: 1
USB version/speed: 1/Low
Manufacturer: MacAlly
Product: Macally USB Mini Optical Mouse
Address: {745a17a0-74d3-11d0-b6fe-00a0c90f57da}\0046
Current State: Busy
UUID: e5fc1cfd-3d74-4b33-adbf-72bb0de5c2e1
VendorId: 0x1130 (1130)
ProductId: 0x1620 (1620)
Revision: 1.64 (0164)
Port: 4
USB version/speed: 1/Full
Manufacturer: Tenx Technology, Inc.
Product: USB AUDIO
Address: {36fc9e60-c465-11cf-8056-444553540000}\0071
Current State: Busy
UUID: 786b1601-fdc4-43e6-be31-2d497a567139
VendorId: 0x0930 (0930)
ProductId: 0x0225 (0225)
Revision: 1.18 (0118)
Port: 6
USB version/speed: 2/Full
Manufacturer: Broadcom Corp
Product: BCM43142A0
SerialNumber: 28C2DD04AF4C
Address: \\?\usb#vid_80ee&pid_cafe#28c2dd04af4c#{00873fdf-cafe-80ee-a
a5e-00c04fb1720b}
Current State: Captured
UUID: 5c5eeff5-68f3-4a08-b430-597d6f68e4a5
VendorId: 0x0846 (0846)
ProductId: 0x9052 (9052)
Revision: 2.0 (0200)
Port: 2
USB version/speed: 2/High
Manufacturer: Realtek
Product: 802.11ac WLAN Adapter
SerialNumber: 00e04c000001
Address: {4d36e972-e325-11ce-bfc1-08002be10318}\0023
Current State: Busy
UUID: 4b4ee2f0-2015-4cd5-8776-2a2f244c35d1
VendorId: 0x06e6 (06E6)
ProductId: 0xc200 (C200)
Revision: 0.5 (0005)
Port: 4
USB version/speed: 1/Full
Manufacturer: TigerJet Network, Inc.
Product: USB Internet Phone by TigerJet
SerialNumber: A113200107C4C1
Address: {36fc9e60-c465-11cf-8056-444553540000}\0040
Current State: Busy
UUID: ea74aef6-a1bc-4cc3-993f-1a54750e00af
VendorId: 0x04f2 (04F2)
ProductId: 0xb446 (B446)
Revision: 39.8 (3908)
Port: 7
USB version/speed: 2/High
Manufacturer: Chicony Electronics Co., Ltd
Product: TOSHIBA Web Camera - HD
Address: {36fc9e60-c465-11cf-8056-444553540000}\0017
Current State: Busy
C:\Program Files\Oracle\VirtualBox>
Re: Trouble Running Guest Only For Netgear Wireless Adapter
Posted: 29. Jun 2019, 03:16
by socratis
I'm sorry, I should have mentioned that you should run those commands in a Command Prompt on your host. mea culpa.
I see a device, with VendorID:ProductID of 0x0846:0x9052. In the
USB database, this is listed as a "Netgear:A6100 AC600 DB Wireless Adapter [Realtek RTL8811AU]". And in the command that you entered it shows up as a "Realtec 802.11ac WLAN Adapter". Maybe there's some confusion in the name, and what you were expecting to see as Netgear, shows up instead as Realtec? Can you try and grab that device in your guest?
Re: Trouble Running Guest Only For Netgear Wireless Adapter
Posted: 29. Jun 2019, 03:45
by Tuppo
When I capture it, the host and the guest go offline, and the adapter disappears from the Network Connections list on Windows.
Re: Trouble Running Guest Only For Netgear Wireless Adapter
Posted: 29. Jun 2019, 09:46
by socratis
I think it's high time that we see a log. And the VM recipe...
I need to see a
complete VBox.log, from a
complete VM run, where the problem occurs:
- Start the VM from cold-boot (not from a paused or saved state) / Observe problem / Shutdown the VM (force close it if you have to).
- With the VM completely shut down (not paused or saved), right-click on the VM in the VirtualBox Manager and select "Show Log".
- Save only the first "VBox.log", ZIP it and attach it to your response. See the "Upload attachment" tab below the reply form.
I would also like to see the "recipe" of the VM, the ".vbox" file:
- Right-click on the VM in the VirtualBox Manager. Select "Show in Finder/Explorer/Whatever".
- ZIP the selected ".vbox" file and attach it to your response.
Re: Trouble Running Guest Only For Netgear Wireless Adapter
Posted: 30. Jun 2019, 03:05
by Tuppo
I zipped both files, but the forum will not upload the log file, because it's too big.
As far as the .vbox file, the closest file I could find with that extension is Linux Mint.vbox-prev, and the forum will not accept a file with that extension.
