Network settings: good connection but no internet access
Posted: 31. Mar 2019, 04:34
Host: Windows 10 Pro x64 Guest:
Linux (Manjaro) x64 VB: 6.0.4
I lost the ability to browse the internet, but I have network connection based on the following tests:
ifconfig:
Several pings:
FYI: I can also ping a web-page address but the rules of this forums cannot allow me show this part.
However, when I open Firefox and try to go to any web page, I cannot reach anything.
If my problem is related to “firewalls, proxies, antivirus filters, web-cleaning applications, redirectors, etc” in Windows 10, I need some assistance in order to know what the next step is.
Thank you
Linux (Manjaro) x64 VB: 6.0.4
I lost the ability to browse the internet, but I have network connection based on the following tests:
ifconfig:
Code: Select all
enp0s3: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 10.0.2.15 netmask 255.255.255.0 broadcast 10.0.2.255
inet6 fe80::3184:7b10:b882:ecb3 prefixlen 64 scopeid 0x20<link>
ether 08:00:27:c5:43:03 txqueuelen 1000 (Ethernet)
RX packets 5271 bytes 3809155 (3.6 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 5393 bytes 1048003 (1023.4 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
enp0s8: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 08:00:27:74:69:6b txqueuelen 1000 (Ethernet)
RX packets 1787 bytes 504378 (492.5 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 1808 bytes 194586 (190.0 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 303 bytes 39769 (38.8 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 303 bytes 39769 (38.8 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
Code: Select all
2019-03-30 20:57:59 ⌚ ad-mnsu in ~
○ → ping 1.1.1.1
PING 1.1.1.1 (1.1.1.1) 56(84) bytes of data.
64 bytes from 1.1.1.1: icmp_seq=1 ttl=48 time=40.2 ms
64 bytes from 1.1.1.1: icmp_seq=2 ttl=48 time=40.7 ms
64 bytes from 1.1.1.1: icmp_seq=3 ttl=48 time=40.0 ms
^C
--- 1.1.1.1 ping statistics ---
4 packets transmitted, 3 received, 25% packet loss, time 5ms
rtt min/avg/max/mdev = 40.046/40.321/40.731/0.375 ms
2019-03-30 20:58:06 ⌚ ad-mnsu in ~
○ → ping 10.0.2.1
PING 10.0.2.1 (10.0.2.1) 56(84) bytes of data.
From 10.0.2.15 icmp_seq=1 Destination Host Unreachable
From 10.0.2.15 icmp_seq=2 Destination Host Unreachable
From 10.0.2.15 icmp_seq=3 Destination Host Unreachable
^C
--- 10.0.2.1 ping statistics ---
4 packets transmitted, 0 received, +3 errors, 100% packet loss, time 44ms
pipe 4
However, when I open Firefox and try to go to any web page, I cannot reach anything.
If my problem is related to “firewalls, proxies, antivirus filters, web-cleaning applications, redirectors, etc” in Windows 10, I need some assistance in order to know what the next step is.
Thank you