Shrav wrote:Hi scottgus1, Thanks issue is resolved after assigning static route, Thanks for your valuble time supporting me.
Hi Shrav, could you share how/where did you assign static address ? Thanks
Shrav wrote:Hi scottgus1, Thanks issue is resolved after assigning static route, Thanks for your valuble time supporting me.
Code: Select all
C:\Program Files\Oracle\VirtualBox>.\VboxManage.exe list hostonlyifs
Name: VirtualBox Host-Only Ethernet Adapter
GUID: 50c00a5a-ff22-4aa0-8d70-e6a594f46944
DHCP: Disabled
IPAddress: 192.168.56.1
NetworkMask: 255.255.255.0
IPV6Address: fe80::ec1b:a54:7c2f:ebfd
IPV6NetworkMaskPrefixLength: 64
HardwareAddress: 0a:00:27:00:00:0a
MediumType: Ethernet
Wireless: No
Status: Up
VBoxNetworkName: HostInterfaceNetworking-VirtualBox Host-Only Ethernet Adapter
C:\Program Files\Oracle\VirtualBox>.\VboxManage.exe list dhcpservers
NetworkName: HostInterfaceNetworking-VirtualBox Host-Only Ethernet Adapter
Dhcpd IP: 192.168.56.100
LowerIPAddress: 192.168.56.101
UpperIPAddress: 192.168.56.254
NetworkMask: 255.255.255.0
Enabled: Yes
Global Configuration:
minLeaseTime: default
defaultLeaseTime: default
maxLeaseTime: default
Forced options: None
Suppressed opts.: None
1/legacy: 255.255.255.0
Groups: None
Individual Configs: None
Code: Select all
jlearman@jlearman-VBox:~$ nmcli dev show
GENERAL.DEVICE: docker0
GENERAL.TYPE: bridge
GENERAL.HWADDR: 02:42:7A:E2:86:02
GENERAL.MTU: 1500
GENERAL.STATE: 100 (connected)
GENERAL.CONNECTION: docker0
GENERAL.CON-PATH: /org/freedesktop/NetworkManager/ActiveConnection/2
IP4.ADDRESS[1]: 172.17.0.1/16
IP4.GATEWAY: --
IP4.ROUTE[1]: dst = 172.17.0.0/16, nh = 0.0.0.0, mt = 0
IP4.ROUTE[2]: dst = 169.254.0.0/16, nh = 0.0.0.0, mt = 1000
IP6.GATEWAY: --
GENERAL.DEVICE: enp0s3
GENERAL.TYPE: ethernet
GENERAL.HWADDR: 08:00:27:1A:AC:FA
GENERAL.MTU: 1500
GENERAL.STATE: 30 (disconnected)
GENERAL.CONNECTION: --
GENERAL.CON-PATH: --
WIRED-PROPERTIES.CARRIER: on
GENERAL.DEVICE: lo
GENERAL.TYPE: loopback
GENERAL.HWADDR: 00:00:00:00:00:00
GENERAL.MTU: 65536
GENERAL.STATE: 10 (unmanaged)
GENERAL.CONNECTION: --
GENERAL.CON-PATH: --
IP4.ADDRESS[1]: 127.0.0.1/8
IP4.GATEWAY: --
IP6.ADDRESS[1]: ::1/128
IP6.GATEWAY: --
IP6.ROUTE[1]: dst = ::1/128, nh = ::, mt = 256
That won't work. Two PCs cannot share one end of a VPN connection: you can only use the host's VPN if you use NAT, because in that case the VM is actually using the host's Internet connection.JeffLearman wrote:UPDATE: The reason I used Bridged mode is to allow the guest to use the host's VPN tunnel.