Page 1 of 1

ETH2 becomes ETH4

PostPosted: 26. Jan 2010, 15:02
by javadude
Hi !
just installed Ubuntu 9.10 Server (from ISO) as guest running von VB 3.2.1 on Ubuntu 9.10 Desktop as host.
The network is setup with a bridged adapter (1) and a host-only adapter (2). Starting the guest Ubuntu it comes up with eth1 and eth2 (same configured in /etc/network/interfaces)

Code: Select all   Expand viewCollapse view
auto eth1
iface eth1 inet dhcp

auto eth2
iface eth2 inet dhcp


Then export as appliance and import into another Ubuntu desktop (different box but same Ubuntu version), the network would not start up because eth3 and eth4 are as interface available only.
Then I would need to reconfigure the interfaces file to match that. This is not my intention. I need the guest system to be running without anyone touching it.

How does Ubuntu (as guest) gets the interfaces ? Or why does it create eth3 and 4, not 1 and 2 ?

Thanks for any tips
Sven

Re: ETH2 becomes ETH4

PostPosted: 26. Jan 2010, 16:25
by Perryg
There is a Linux (feature) that is causing this. When the Linux OS detects a change in the MAC address it ups the network naming to protect the original settings.
You can edit the /etc/udev/rules.d/70-persistent-net.rules or you can delete the rules and Linux will configure it on the next boot.