Don't boot when USB3 Enabled, from 10.11.6
Don't boot when USB3 Enabled, from 10.11.6
Hi
Today J upgrade my Guest Machine from 10.11.3 to 10.11.6 and machine don't boot,
J try change settings and machine started after disable USB 3.
After update to Sierra (10.12) the some, do not when USB 3 is enabled.
but for one second is access denied message
J use VirtualBox 5.1.14, (under 5.1.12 the some problem)
My Host is: Mac Sierra, (under Captain the some problem)
Please help, only under USB 3 Smart card readers working. under USB 2 not responding often
Today J upgrade my Guest Machine from 10.11.3 to 10.11.6 and machine don't boot,
J try change settings and machine started after disable USB 3.
After update to Sierra (10.12) the some, do not when USB 3 is enabled.
but for one second is access denied message
J use VirtualBox 5.1.14, (under 5.1.12 the some problem)
My Host is: Mac Sierra, (under Captain the some problem)
Please help, only under USB 3 Smart card readers working. under USB 2 not responding often
-
- Site Moderator
- Posts: 39134
- Joined: 4. Sep 2008, 17:09
- Primary OS: MS Windows 10
- VBox Version: PUEL
- Guest OSses: Mostly XP
Re: Don't boot when USB3 Enabled, from 10.11.6
Please post a VM log file. With the VM fully shut down, right click and "Show Log" in the GUI, save "VBox.log" (ONLY) to a zip, and attach the zip here.
Re: Don't boot when USB3 Enabled, from 10.11.6
Please, in attachment,
Don't start,
when stop in logs:
00:00:01.825273 xHCI: Hardware reset
00:00:01.825302 VUSB: HidKeyboard: reset request is ignored, the device is already resetting!
00:00:01.825305 VUSB: HidMouse: reset request is ignored, the device is already resetting!
00:00:01.825316 VUSB: HidKeyboard: reset request is ignored, the device is already resetting!
00:00:01.825318 VUSB: HidMouse: reset request is ignored, the device is already resetting!
00:00:01.825433 xHCI: USB Operational
00:00:01.834966 xHCI: root hub-attached device reset completed with VINF_SUCCESS
J manualy click poweroff,
below macosx startup logs:
Don't start,
when stop in logs:
00:00:01.825273 xHCI: Hardware reset
00:00:01.825302 VUSB: HidKeyboard: reset request is ignored, the device is already resetting!
00:00:01.825305 VUSB: HidMouse: reset request is ignored, the device is already resetting!
00:00:01.825316 VUSB: HidKeyboard: reset request is ignored, the device is already resetting!
00:00:01.825318 VUSB: HidMouse: reset request is ignored, the device is already resetting!
00:00:01.825433 xHCI: USB Operational
00:00:01.834966 xHCI: root hub-attached device reset completed with VINF_SUCCESS
J manualy click poweroff,
below macosx startup logs:
- Attachments
-
- macosx startup logs
- 1485332963362.png (8.68 KiB) Viewed 5389 times
-
- VBox.zip
- macosx usb3 enabled boot problem
- (26.65 KiB) Downloaded 23 times
-
- Site Moderator
- Posts: 39134
- Joined: 4. Sep 2008, 17:09
- Primary OS: MS Windows 10
- VBox Version: PUEL
- Guest OSses: Mostly XP
Re: Don't boot when USB3 Enabled, from 10.11.6
I'm finding it difficult to be sure if you are talking about updating the guest or the host or both, and maybe VirtualBox too. I suspect that the error may be something to do with saving the state of a VM and then starting up on a different host. Discard any saved states associated with the VM.
On a separate matter, I notice that you have 3D acceleration enabled in this VM. You might as well disable this, since there are no Guest Additions available (for OS X guests) to make use of 3D acceleration.
On a separate matter, I notice that you have 3D acceleration enabled in this VM. You might as well disable this, since there are no Guest Additions available (for OS X guests) to make use of 3D acceleration.
-
- Site Moderator
- Posts: 27329
- Joined: 22. Oct 2010, 11:03
- Primary OS: Mac OS X other
- VBox Version: PUEL
- Guest OSses: Win(*>98), Linux*, OSX>10.5
- Location: Greece
Re: Don't boot when USB3 Enabled, from 10.11.6
• How did you install 10.11 on the VM? Full details please...
• What happens if you restore one of your previous snapshots? Does it boot?
• What happens if you restore one of your previous snapshots? Does it boot?
Do NOT send me Personal Messages (PMs) for troubleshooting, they are simply deleted.
Do NOT reply with the "QUOTE" button, please use the "POST REPLY", at the bottom of the form.
If you obfuscate any information requested, I will obfuscate my response. These are virtual UUIDs, not real ones.
Do NOT reply with the "QUOTE" button, please use the "POST REPLY", at the bottom of the form.
If you obfuscate any information requested, I will obfuscate my response. These are virtual UUIDs, not real ones.
Re: Don't boot when USB3 Enabled, from 10.11.6
- J buy ElCaptain ISO from App Storesocratis wrote:• How did you install 10.11 on the VM? Full details please...
- Add CDROM to VM
- Insert bought CD
- Run install process
- After install USB 3 works OK
- make snapshoot "10.11.3"
- upgrade to 10.11.6
Machine don't boot when USB3 enabled
- make snapshoot "10.11.6"
- restore snapshot "10.11.3"
Machine start and USB3 working
Previus 10.11.3 workingsocratis wrote: • What happens if you restore one of your previous snapshots? Does it boot?
Last edited by linusklan on 25. Jan 2017, 20:25, edited 2 times in total.
Re: Don't boot when USB3 Enabled, from 10.11.6
I tested Configurations:mpack wrote:I'm finding it difficult to be sure if you are talking about updating the guest or the host or both, and maybe VirtualBox too.
Mac Host Sierra - VierualBox 5.1.12 - VM Elcaptain 10.11.3 - working
Mac Host Sierra - VierualBox 5.1.14 - VM Elcaptain 10.11.3 - working
Mac Host Sierra - VierualBox 5.1.12 - VM Elcaptain 10.11.6 - don't work
Mac Host Sierra - VierualBox 5.1.14 - VM Elcaptain 10.11.6 - don't work
No, host is the somempack wrote:I suspect that the error may be something to do with saving the state of a VM and then starting up on a different host. .
J clone machine, current state to another and nothing.mpack wrote:Discard any saved states associated with the VM..
mpack wrote: On a separate matter, I notice that you have 3D acceleration enabled in this VM. You might as well disable this, since there are no Guest Additions available (for OS X guests) to make use of 3D acceleration.
Thanks I disable it
-
- Site Moderator
- Posts: 27329
- Joined: 22. Oct 2010, 11:03
- Primary OS: Mac OS X other
- VBox Version: PUEL
- Guest OSses: Win(*>98), Linux*, OSX>10.5
- Location: Greece
Re: Don't boot when USB3 Enabled, from 10.11.6
Can you give me the link? As far as I know you cannot buy the El Capitan ISO. For two reasons: 1) it's not for sale because it's free and 2) there is no El Capitan ISO, not from Apple at least. There's a DMG installer that needs special "massage" to turn it into an ISO.linusklan wrote:- J buy ElCaptain ISO from App Store
Do NOT send me Personal Messages (PMs) for troubleshooting, they are simply deleted.
Do NOT reply with the "QUOTE" button, please use the "POST REPLY", at the bottom of the form.
If you obfuscate any information requested, I will obfuscate my response. These are virtual UUIDs, not real ones.
Do NOT reply with the "QUOTE" button, please use the "POST REPLY", at the bottom of the form.
If you obfuscate any information requested, I will obfuscate my response. These are virtual UUIDs, not real ones.
Re: Don't boot when USB3 Enabled, from 10.11.6
Eeee, see here: https://support.apple.com/pl-pl/HT202161, first position in "kupione" (purasched). possible that I changed it to iso
Last edited by socratis on 25. Jan 2017, 23:17, edited 1 time in total.
Reason: Removed unnecessary verbatim quote of the whole previous message.
Reason: Removed unnecessary verbatim quote of the whole previous message.
-
- Site Moderator
- Posts: 27329
- Joined: 22. Oct 2010, 11:03
- Primary OS: Mac OS X other
- VBox Version: PUEL
- Guest OSses: Win(*>98), Linux*, OSX>10.5
- Location: Greece
Re: Don't boot when USB3 Enabled, from 10.11.6
Possible? You're not sure? Do you see a problem with that "rename" action? If you changed it to MP4 would you expect to see a movie? Extensions have a purpose. If you changed it from DMG to ISO, expect trouble. So, please, make sure of what you did. It's really important...linusklan wrote:possible that I changed it to iso
PS. The Apple article in English: https://support.apple.com/en-us/HT202161
Do NOT send me Personal Messages (PMs) for troubleshooting, they are simply deleted.
Do NOT reply with the "QUOTE" button, please use the "POST REPLY", at the bottom of the form.
If you obfuscate any information requested, I will obfuscate my response. These are virtual UUIDs, not real ones.
Do NOT reply with the "QUOTE" button, please use the "POST REPLY", at the bottom of the form.
If you obfuscate any information requested, I will obfuscate my response. These are virtual UUIDs, not real ones.
Re: Don't boot when USB3 Enabled, from 10.11.6
J found solution, J add one CPU more and starts, but not stable, often come back to login screen
-
- Site Moderator
- Posts: 27329
- Joined: 22. Oct 2010, 11:03
- Primary OS: Mac OS X other
- VBox Version: PUEL
- Guest OSses: Win(*>98), Linux*, OSX>10.5
- Location: Greece
Re: Don't boot when USB3 Enabled, from 10.11.6
Can you right-click on the VM in the VirtualBox Manager, select "Show in Finder", ZIP the selected ".vbox" file and attach it in your response?
Do NOT send me Personal Messages (PMs) for troubleshooting, they are simply deleted.
Do NOT reply with the "QUOTE" button, please use the "POST REPLY", at the bottom of the form.
If you obfuscate any information requested, I will obfuscate my response. These are virtual UUIDs, not real ones.
Do NOT reply with the "QUOTE" button, please use the "POST REPLY", at the bottom of the form.
If you obfuscate any information requested, I will obfuscate my response. These are virtual UUIDs, not real ones.