Which is why I merged your thread with the existing one. See potential workarounds in the posts before yours...MiloTheDev wrote:Dude, I have the same problem..
W10 1809 (x64,2nd update) can't pass OOBE Setup
-
socratis
- Site Moderator
- Posts: 27329
- Joined: 22. Oct 2010, 11:03
- Primary OS: Mac OS X other
- VBox Version: PUEL
- Guest OSses: Win(*>98), Linux*, OSX>10.5
- Location: Greece
Re: W10 1809 (x64,2nd update) can't pass OOBE Setup
Do NOT send me Personal Messages (PMs) for troubleshooting, they are simply deleted.
Do NOT reply with the "QUOTE" button, please use the "POST REPLY", at the bottom of the form.
If you obfuscate any information requested, I will obfuscate my response. These are virtual UUIDs, not real ones.
Do NOT reply with the "QUOTE" button, please use the "POST REPLY", at the bottom of the form.
If you obfuscate any information requested, I will obfuscate my response. These are virtual UUIDs, not real ones.
Re: W10 1809 (x64,2nd update) can't pass OOBE Setup
This worked for me as wellTLhM wrote:TeutonJon78 wrote:VB: 5.2.22
in my case was to modify two settings of the VM:
increase the number of processor to 2
enable PAE/NX (in the same settings page)
-
MiloTheDev
- Posts: 27
- Joined: 27. Dec 2018, 02:35
- Primary OS: MS Windows other
- VBox Version: OSE other
- Guest OSses: None that work at the moment
Re: W10 1809 (x64,2nd update) can't pass OOBE Setup
guys, While i was n=messing around w/ the vm settings, I actually ended up finding a solution.
1: Open Settings for the VM
2: Enable 2d and 3d exellaration
3: be sure the vid memory is set to its highest value, should be 256 mb
4: enable I/O APCI
5: disable the remote server
6: and your pretty much done!
Hope this helps. (yes, i was using an OFFICAIL MICROSOFT 1809 iso)
If this is not working, It could be your host os, Mine is Windows 10 v1709.
Bye!!!
1: Open Settings for the VM
2: Enable 2d and 3d exellaration
3: be sure the vid memory is set to its highest value, should be 256 mb
4: enable I/O APCI
5: disable the remote server
6: and your pretty much done!
Hope this helps. (yes, i was using an OFFICAIL MICROSOFT 1809 iso)
If this is not working, It could be your host os, Mine is Windows 10 v1709.
Bye!!!
From, MiloTheDev.
-
MiloTheDev
- Posts: 27
- Joined: 27. Dec 2018, 02:35
- Primary OS: MS Windows other
- VBox Version: OSE other
- Guest OSses: None that work at the moment
Re: W10 1809 (x64,2nd update) can't pass OOBE Setup
also, It could be your VBOX version, I am using the latest vbox. (6.0.0)This and Maybe something else. wrote: If this is not working, It could be your host os, Mine is Windows 10 v1709.
From, MiloTheDev.
Re: W10 1809 (x64,2nd update) can't pass OOBE Setup
Just wanted to confirm that THIS is what solved my issue. I was only running it on 1 core @ 1.6GHz, so it was timing out. Upping it to 2 cores fixed the issue.TLhM wrote:in my case was to modify two settings of the VM:
increase the number of processor to 2
enable PAE/NX (in the same settings page)
I'm running the VM on an old server with a single Xeon X5110 (Dual core @ 1.6GHz), so I enabled dual core for the VM install, then brought the core count back down to 1 core once it was installed.
Thanks!