When running the Powershell script to get memory
Code: Select all
Get-WmiObject Win32_PhysicalMemory
I have to rely on that Powershell command as I have a monitoring tool that pulls information from that command.
Is there something I need to tweak in my Virtualbox configuration to allow the OS to gather the memory correctly when the Powershell command is run?
Code: Select all
vmuser@host:~$ vboxmanage showvminfo Win11Client1
Name: Win11Client1
Encryption: disabled
Groups: /
Guest OS: Windows 11 (64-bit)
UUID: 2be2f6d3-3912-4179-832f-45443cc65bc6
Config file: /storage/virtualmachines/Win11Client1/Win11Client1.vbox
Snapshot folder: /storage/virtualmachines/Win11Client1/Snapshots
Log folder: /storage/virtualmachines/Win11Client1/Logs
Hardware UUID: 2be2f6d3-3912-4179-832f-45443cc65bc6
Memory size: 4096MB
Page Fusion: disabled
VRAM size: 128MB
CPU exec cap: 100%
HPET: disabled
CPUProfile: host
Chipset: piix3
Firmware: EFI
Number of CPUs: 2
PAE: enabled
Long Mode: enabled
Triple Fault Reset: disabled
APIC: enabled
X2APIC: disabled
Nested VT-x/AMD-V: disabled
CPUID Portability Level: 0
CPUID overrides: None
Boot menu mode: disabled
Boot Device 1: DVD
Boot Device 2: HardDisk
Boot Device 3: Not Assigned
Boot Device 4: Not Assigned
ACPI: enabled
IOAPIC: enabled
BIOS APIC mode: APIC
Time offset: 0ms
BIOS NVRAM File: /storage/virtualmachines/Win11Client1/Win11Client1.nvram
RTC: local time
Hardware Virtualization: enabled
Nested Paging: enabled
Large Pages: enabled
VT-x VPID: enabled
VT-x Unrestricted Exec.: enabled
AMD-V Virt. Vmsave/Vmload: enabled
IOMMU: None
Paravirt. Provider: Default
Effective Paravirt. Prov.: HyperV
State: running (since 2022-11-22T19:05:11.541000000)
Graphics Controller: VBoxVGA
Monitor count: 1
3D Acceleration: disabled
2D Video Acceleration: disabled
Teleporter Enabled: disabled
Teleporter Port: 0
Teleporter Address:
Teleporter Password:
Tracing Enabled: disabled
Allow Tracing to Access VM: disabled
Tracing Configuration:
Autostart Enabled: disabled
Autostart Delay: 0
Default Frontend:
VM process priority: default
Storage Controllers:
#0: 'SATA Controller', Type: IntelAhci, Instance: 0, Ports: 30 (max 30), Bootable
Port 0, Unit 0: UUID: cedbb2f1-59b7-4fa2-9dd5-e6944575cdd8
Location: "/storage/virtualmachines/Win11Client1/DISK1.vdi"
#1: 'IDE Controller', Type: PIIX4, Instance: 0, Ports: 2 (max 2), Bootable
Port 1, Unit 0: UUID: 4e20c13c-0eb7-4b72-9625-33d2d0af6437
Location: "/iso/VBoxGuestAdditions_7.0.4.iso"
NIC 1: MAC: 080027C345C0, Attachment: Bridged Interface 'enp7s0', Cable connected: on, Trace: off (file: none), Type: 82540EM, Reported speed: 0 Mbps, Boot priority: 0, Promisc Policy: deny, Bandwidth group: none
NIC 2: disabled
NIC 3: disabled
NIC 4: disabled
NIC 5: disabled
NIC 6: disabled
NIC 7: disabled
NIC 8: disabled
Pointing Device: PS/2 Mouse
Keyboard Device: PS/2 Keyboard
UART 1: disabled
UART 2: disabled
UART 3: disabled
UART 4: disabled
LPT 1: disabled
LPT 2: disabled
Audio: enabled (Driver: Default, Controller: AC97, Codec: STAC9700)
Audio playback: disabled
Audio capture: disabled
Clipboard Mode: disabled
Drag and drop Mode: disabled
Session name: headless
Video mode: 1792x1120x32 at 0,0 enabled
VRDE: enabled (Address 192.168.1.12, Ports 49998, MultiConn: on, ReuseSingleConn: off, Authentication type: null)
VRDE port: 49998
Video redirection: disabled
VRDE property : TCP/Ports = "49998"
VRDE property : TCP/Address = "192.168.1.12"
VRDE property : VideoChannel/Enabled = <not set>
VRDE property : VideoChannel/Quality = <not set>
VRDE property : VideoChannel/DownscaleProtection = <not set>
VRDE property : Client/DisableDisplay = <not set>
VRDE property : Client/DisableInput = <not set>
VRDE property : Client/DisableAudio = <not set>
VRDE property : Client/DisableUSB = <not set>
VRDE property : Client/DisableClipboard = <not set>
VRDE property : Client/DisableUpstreamAudio = <not set>
VRDE property : Client/DisableRDPDR = <not set>
VRDE property : H3DRedirect/Enabled = <not set>
VRDE property : Security/Method = <not set>
VRDE property : Security/ServerCertificate = <not set>
VRDE property : Security/ServerPrivateKey = <not set>
VRDE property : Security/CACertificate = <not set>
VRDE property : Audio/RateCorrectionMode = <not set>
VRDE property : Audio/LogPath = <not set>
OHCI USB: disabled
EHCI USB: disabled
xHCI USB: disabled
USB Device Filters: <none>
Available remote USB devices: <none>
Currently attached USB devices: <none>
Bandwidth groups: <none>
Shared folders: <none>
VRDE Connection: active
Clients so far: 2
Start time: 2022/11/22 19:05:52 UTC
Sent: 85233282Bytes
Average speed: 282972B/s
Sent total: 85233282Bytes
Received: 30483Bytes
Speed: 101B/s
Received total: 30483Bytes
User name: a
Domain:
Client name: M-HOST1234
Client IP: 192.168.1.226
Client version: 67564
Encryption: RDP4
Recording enabled: no
Recording screens: 1
Screen 0:
Enabled: yes
ID: 0
Record video: yes
Destination: File
File: /storage/virtualmachines/Win11Client1/Win11Client1-screen0.webm
Options: vc_enabled=true,ac_enabled=false,ac_profile=med
Video dimensions: 1024x768
Video rate: 512kbps
Video FPS: 25fps
* Guest:
Configured memory balloon: 0MB
OS type: Windows11_64
Additions run level: 3
Additions version: 7.0.4 r154605
Guest Facilities:
Facility "VirtualBox Base Driver": active/running (last update: 2022/11/22 19:05:15 UTC)
Facility "VirtualBox System Service": active/running (last update: 2022/11/22 19:05:20 UTC)
Facility "VirtualBox Desktop Integration": active/running (last update: 2022/11/22 19:06:26 UTC)
Facility "Seamless Mode": active/running (last update: 2022/11/22 19:06:26 UTC)
Facility "Graphics Mode": active/running (last update: 2022/11/22 19:06:26 UTC)