Hello, stes.
I checked your answer and completed the test a little before.
In conclusion, thanks to you, I have solved everything.
After I saw the command below you mentioned, I changed the test sequence a bit.:
Code: Select all
prtconf -v|sed -n '/bootpath/,/value/p'
name='bootpath' type=string items=1
value='/pci@0,0/pci8086,2829@d/disk@1,0:b'
Code: Select all
bash-3.2# prtconf -v|sed -n '/bootpath/,/value/p'
name='bootpath' type=string items=1
value='/pseudo/md@0:0,10,blk'
Code: Select all
bash-3.2# metadb
flags first blk block count
Wm p l 16 8192 /dev/dsk/c0t0d0s3
a p luo 16 8192 /dev/dsk/c0t1d0s3
bash-3.2# metastat d10
d10: Mirror
Submirror 0: d11
State: Needs maintenance
Submirror 1: d12
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 37592100 blocks (17 GB)
d11: Submirror of d10
State: Needs maintenance
Invoke: metareplace d10 c0t0d0s0 <new device>
Size: 37592100 blocks (17 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c0t0d0s0 0 No Maintenance Yes
d12: Submirror of d10
State: Okay
Size: 37592100 blocks (17 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c0t1d0s0 0 No Okay Yes
Device Relocation Information:
Device Reloc Device ID
c0t0d0 Yes id1,sd@SATA_____VBOX_HARDDISK____VB2d132386-0d678dd0
c0t1d0 Yes id1,sd@SATA_____VBOX_HARDDISK____VBeb4e8a41-54b5747e
bash-3.2# metadb -f -d c0t0d0s3
bash-3.2# metadetach -f d10 d11
d10: submirror d11 is detached
bash-3.2# metadetach -f d20 d21
d20: submirror d21 is detached
bash-3.2# metaclear d11 d21
d11: Concat/Stripe is cleared
d21: Concat/Stripe is cleared
bash-3.2# cfgadm -al | grep 'sata0/[01]\>'
sata0/0 sata-port empty unconfigured ok
sata0/1::dsk/c0t1d0 disk connected configured ok
Code: Select all
bash-3.2# cfgadm -al | grep 'sata0/[01]\>'
sata0/0 disk connected unconfigured unknown
sata0/1::dsk/c0t1d0 disk connected configured ok
bash-3.2# cfgadm -c configure sata0/0
bash-3.2# cfgadm -al | grep 'sata0/[01]\>'
sata0/0::dsk/c0t0d0 disk connected configured ok
sata0/1::dsk/c0t1d0 disk connected configured ok
bash-3.2# echo | format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c0t0d0 <ATA -VBOX HARDDISK -1.0 cyl 2608 alt 2 hd 255 sec 63>
/pci@0,0/pci8086,2829@d/disk@0,0
1. c0t1d0 <ATA -VBOX HARDDISK -1.0 cyl 2607 alt 2 hd 255 sec 63>
/pci@0,0/pci8086,2829@d/disk@1,0
Specify disk (enter its number): Specify disk (enter its number):
Thank you, guy.