Please Help ME,Building Vbox 4.3.12 Success,But Run Error!

Discussions related to using the OSE version of VirtualBox.

Please Help ME,Building Vbox 4.3.12 Success,But Run Error!

Postby yshejia » 30. Aug 2015, 02:40

Hold on, please.
Referring to the method of wiki/Windows%20build%20instructions, successfully compiled 4.3.12. Only a few warnings in the compilation process, there is no Error information!
After the build, follow the steps below to try to run it:
1, running comregister.cmd

2, running loadall.cmd, you can see the following information in the VS_CMD window:
My_Dir=c:/BulldTools/VboxSrc/Out/win.x86/release/bin
load.sh:VBoxNetAdp - STTOPPED
load.sh:VBoxNetFlt - STTOPPED
load.sh:VBoxUSBMon - STTOPPED
load.sh:VBoxUSB - Not configured , probably.
load.sh:VBoxDrv - STTOPPED

3, running VBoxSDL.exe, tip: error: RTR3Init: VERR_VM_DRIVER_NOT_INSTALLED fatal

4, running VirtualBox.exe, you can successfully create a VM, but when the "start", will pop up a prompt box:
VirtualBox Runtime Error
Cannot Access the kernel driver!
Make Sure the kernel module has been loaded successfully.

To try to solve the following several methods, invalid.
1, to find VBoxDrv.inf, the right mouse button - "install"

2, setupapi InstallHinfSection, DefaultInstall rundll32 132 VBoxDrv.inf

3, VBoxDrv.inf InfDefaultInstall.exe

============================================
Hold on, please. I really can't do it! If you could help me, I would be very grateful.
yshejia
 
Posts: 3
Joined: 30. Aug 2015, 02:08

Re: Please Help ME,Building Vbox 4.3.12 Success,But Run Erro

Postby mhanor » 30. Aug 2015, 16:59

You haven't specified what's your host OS. Most likely, you must run comregister.cmd and loadall.cmd as Administrator (from an elevated Command Prompt). If you're running a 64 bit Windows Vista or newer, you must also sign your VirtualBox drivers.
mhanor
Volunteer
 
Posts: 317
Joined: 7. Oct 2009, 12:40
Primary OS: MS Windows 10
VBox Version: PUEL
Guest OSses: various

Re: Please Help ME,Building Vbox 4.3.12 Success,But Run Erro

Postby yshejia » 30. Aug 2015, 18:02

mhanor wrote:You haven't specified what's your host OS. Most likely, you must run comregister.cmd and loadall.cmd as Administrator (from an elevated Command Prompt). If you're running a 64 bit Windows Vista or newer, you must also sign your VirtualBox drivers.

Thank you very much, my host OS is WIN7 x64, is unable to run the compiled file. And I put the compiled file into the Windows 2003 X86 SP2 ,it is very normal.
That's what you say. Thank you
yshejia
 
Posts: 3
Joined: 30. Aug 2015, 02:08

Re: Please Help ME,Building Vbox 4.3.12 Success,But Run Erro

Postby frankluo » 26. Feb 2016, 04:10

sign your VirtualBox drivers.
*.sys and *.r0
frankluo
 
Posts: 8
Joined: 8. Jan 2016, 03:41


Return to VirtualBox OSE

Who is online

Users browsing this forum: No registered users and 3 guests