Trunk linux guest addons issue

Discussions related to using the OSE version of VirtualBox.

Trunk linux guest addons issue

Postby Menion » 5. Nov 2014, 13:58

Hi all
I've just compiled the Virtualbox trunk to generate Linux amd64 guest addons, in order to try to solve an issue with 3D acceleration of Linux guest O.S on a Windows host running Intel HD graphic car and last drivers
Everything went smoothly, however the guest addons installation fails:
Verifying archive integrity... All good.
Uncompressing VirtualBox 4.3.53_OSE Guest Additions for Linux 100%
VirtualBox Guest Additions installer
Removing installed version 4.3.53_OSE of VirtualBox Guest Additions...
Removing existing VirtualBox DKMS kernel modules [ OK ]
Removing existing VirtualBox non-DKMS kernel modules [ OK ]
Building the VirtualBox Guest Additions kernel modules [ OK ]
Doing non-kernel setup of the Guest Additions [ OK ]
Starting the VirtualBox Guest Additions [FAILED]
(modprobe vboxguest failed)

Installing the Window System drivers
Installing X . Org Server 1.14 modules [ OK ]
Setting up the Window System to use the Guest Additions [ OK ]
You may need to restart the the Window System (or just restart the guest system)
to enable the Guest Additions.

Installing graphics libraries and desktop services componen[ OK ]

from dmesg the problem is
[ 636.515981] vboxguest: Unknown symbol VBoxGuest_RTStrCopyEx (err 0)

depmod is run, it should not be a mod dependency issue, since vboxguest.ko is the root module, right?
Any help to solve this issue?
Bye
Menion
 
Posts: 17
Joined: 5. Nov 2014, 13:49

Re: Trunk linux guest addons issue

Postby Perryg » 5. Nov 2014, 15:41

What exactly is the guest?

I first saw this issue yesterday on a Ubuntu 15.04 guest and have not been able to track it down just yet, but suspect new host code that they have not ported to the guest additions just yet.



Moving to OSE.
Perryg
Site Moderator
 
Posts: 34373
Joined: 6. Sep 2008, 22:55
Primary OS: Linux other
VBox Version: OSE self-compiled
Guest OSses: *NIX

Re: Trunk linux guest addons issue

Postby Menion » 5. Nov 2014, 18:46

It's Fedora 19, kernel 3.9.9
Menion
 
Posts: 17
Joined: 5. Nov 2014, 13:49

Re: Trunk linux guest addons issue

Postby Perryg » 5. Nov 2014, 19:05

Thanks,

I have reported this to the DEVs so they can see what the issue is. I do know the problem started after SVN r53112 release date ( 10/21/2014 )
Perryg
Site Moderator
 
Posts: 34373
Joined: 6. Sep 2008, 22:55
Primary OS: Linux other
VBox Version: OSE self-compiled
Guest OSses: *NIX

Re: Trunk linux guest addons issue

Postby Perryg » 6. Nov 2014, 16:08

Issue has been resolved now in r53241
Perryg
Site Moderator
 
Posts: 34373
Joined: 6. Sep 2008, 22:55
Primary OS: Linux other
VBox Version: OSE self-compiled
Guest OSses: *NIX

Re: Trunk linux guest addons issue

Postby Menion » 7. Nov 2014, 11:44

Hi
Thank you, now the modules can load fine.
However the issue is not resolved.
I have Fedora 19, if I enable the 3D acceleration, the gnome session crash just right after the login (also the gnome classic). It pop up with a screen "Oh, no, something has gone wrong!" and come back to the login.
This has happened after having updated the Intel HD graphic drivers to the last version (required to solve an issue with MS Office 2013 and Windows 7even)
My host is 7even 64 bit professional
I've tried to check in the log for some info, but they look more or less clear
This is the gdm log:

Code: Select all   Expand viewCollapse view
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Compat map for group 2 redefined
>                   Using new definition
> Warning:          Compat map for group 3 redefined
>                   Using new definition
> Warning:          Compat map for group 4 redefined
>                   Using new definition
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Internal error:   Could not resolve keysym XF86AudioMicMute
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Internal error:   Could not resolve keysym XF86AudioMicMute
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Internal error:   Could not resolve keysym XF86AudioMicMute
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Compat map for group 2 redefined
>                   Using new definition
> Warning:          Compat map for group 3 redefined
>                   Using new definition
> Warning:          Compat map for group 4 redefined
>                   Using new definition
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Compat map for group 2 redefined
>                   Using new definition
> Warning:          Compat map for group 3 redefined
>                   Using new definition
> Warning:          Compat map for group 4 redefined
>                   Using new definition
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Compat map for group 2 redefined
>                   Using new definition
> Warning:          Compat map for group 3 redefined
>                   Using new definition
> Warning:          Compat map for group 4 redefined
>                   Using new definition
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Compat map for group 2 redefined
>                   Using new definition
> Warning:          Compat map for group 3 redefined
>                   Using new definition
> Warning:          Compat map for group 4 redefined
>                   Using new definition
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Internal error:   Could not resolve keysym XF86AudioMicMute
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Compat map for group 2 redefined
>                   Using new definition
> Warning:          Compat map for group 3 redefined
>                   Using new definition
> Warning:          Compat map for group 4 redefined
>                   Using new definition
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Compat map for group 2 redefined
>                   Using new definition
> Warning:          Compat map for group 3 redefined
>                   Using new definition
> Warning:          Compat map for group 4 redefined
>                   Using new definition
Errors from xkbcomp are not fatal to the X server
(II) VBoxVideo(0): EDID vendor "VBX", prod id 0
(II) VBoxVideo(0): DDCModeFromDetailedTiming: 1024x768 Warning: We only handle separate sync.
(II) VBoxVideo(0): Using hsync ranges from config file
(II) VBoxVideo(0): Using vrefresh ranges from config file
(II) VBoxVideo(0): Printing DDC gathered Modelines:
(II) VBoxVideo(0): Modeline "1024x768"x0.0   47.83  1024 1026 1028 1030  768 770 772 774 -hsync -vsync (46.4 kHz eP)
(II) VBoxVideo(0): EDID vendor "VBX", prod id 0
(II) VBoxVideo(0): DDCModeFromDetailedTiming: 1024x768 Warning: We only handle separate sync.
(II) VBoxVideo(0): Using hsync ranges from config file
(II) VBoxVideo(0): Using vrefresh ranges from config file
(II) VBoxVideo(0): Printing DDC gathered Modelines:
(II) VBoxVideo(0): Modeline "1024x768"x0.0   47.83  1024 1026 1028 1030  768 770 772 774 -hsync -vsync (46.4 kHz eP)
(II) VBoxVideo(0): EDID vendor "VBX", prod id 0
(II) VBoxVideo(0): DDCModeFromDetailedTiming: 1024x768 Warning: We only handle separate sync.
(II) VBoxVideo(0): Using hsync ranges from config file
(II) VBoxVideo(0): Using vrefresh ranges from config file
(II) VBoxVideo(0): Printing DDC gathered Modelines:
(II) VBoxVideo(0): Modeline "1024x768"x0.0   47.83  1024 1026 1028 1030  768 770 772 774 -hsync -vsync (46.4 kHz eP)
(II) VBoxVideo(0): EDID vendor "VBX", prod id 0
(II) VBoxVideo(0): DDCModeFromDetailedTiming: 1024x768 Warning: We only handle separate sync.
(II) VBoxVideo(0): Using hsync ranges from config file
(II) VBoxVideo(0): Using vrefresh ranges from config file
(II) VBoxVideo(0): Printing DDC gathered Modelines:
(II) VBoxVideo(0): Modeline "1024x768"x0.0   47.83  1024 1026 1028 1030  768 770 772 774 -hsync -vsync (46.4 kHz eP)
(II) VBoxVideo(0): EDID vendor "VBX", prod id 0
(II) VBoxVideo(0): DDCModeFromDetailedTiming: 1024x768 Warning: We only handle separate sync.
(II) VBoxVideo(0): Using hsync ranges from config file
(II) VBoxVideo(0): Using vrefresh ranges from config file
(II) VBoxVideo(0): Printing DDC gathered Modelines:
(II) VBoxVideo(0): Modeline "1024x768"x0.0   47.83  1024 1026 1028 1030  768 770 772 774 -hsync -vsync (46.4 kHz eP)
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Internal error:   Could not resolve keysym XF86AudioMicMute
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
(II) VBoxVideo(0): EDID vendor "VBX", prod id 0
(II) VBoxVideo(0): DDCModeFromDetailedTiming: 1024x768 Warning: We only handle separate sync.
(II) VBoxVideo(0): Using hsync ranges from config file
(II) VBoxVideo(0): Using vrefresh ranges from config file
(II) VBoxVideo(0): Printing DDC gathered Modelines:
(II) VBoxVideo(0): Modeline "1024x768"x0.0   47.83  1024 1026 1028 1030  768 770 772 774 -hsync -vsync (46.4 kHz eP)
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Internal error:   Could not resolve keysym XF86AudioMicMute
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server


this is Xorg log

Code: Select all   Expand viewCollapse view
X.Org X Server 1.14.4
Release Date: 2013-10-31
[   706.405] X Protocol Version 11, Revision 0
[   706.405] Build Operating System:  3.10.9-200.fc19.x86_64
[   706.405] Current Operating System: Linux localhost.localdomain 3.14.22-100.fc19.x86_64 #1 SMP Wed Oct 15 12:46:05 UTC 2014 x86_64
[   706.405] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.14.22-100.fc19.x86_64 root=UUID=8854c910-4545-4638-af73-32441573e562 ro rd.md=0 rd.lvm=0 rd.dm=0 rd.luks=0 vconsole.font=latarcyrheb-sun16 vconsole.keymap=it2 rhgb quiet LANG=en_US.UTF-8
[   706.405] Build Date: 13 November 2013  07:28:45AM
[   706.405] Build ID: xorg-x11-server 1.14.4-3.fc19
[   706.405] Current version of pixman: 0.30.0
[   706.405]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[   706.405] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   706.405] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Nov  7 10:35:05 2014
[   706.405] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   706.405] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   706.405] (==) No Layout section.  Using the first Screen section.
[   706.405] (==) No screen section available. Using defaults.
[   706.405] (**) |-->Screen "Default Screen Section" (0)
[   706.405] (**) |   |-->Monitor "<default monitor>"
[   706.405] (==) No monitor specified for screen "Default Screen Section".
        Using a default monitor configuration.
[   706.405] (==) Automatically adding devices
[   706.405] (==) Automatically enabling devices
[   706.405] (==) Automatically adding GPU devices
[   706.405] (==) FontPath set to:
        catalogue:/etc/X11/fontpath.d,
        built-ins
[   706.405] (==) ModulePath set to "/usr/lib64/xorg/modules"
[   706.405] (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
[   706.405] (II) Loader magic: 0x800d00
[   706.405] (II) Module ABI versions:
[   706.405]    X.Org ANSI C Emulation: 0.4
[   706.405]    X.Org Video Driver: 14.1
[   706.405]    X.Org XInput driver : 19.2
[   706.405]    X.Org Server Extension : 7.0
[   706.405] (II) xfree86: Adding drm device (/dev/dri/card0)
[   706.408] (--) PCI:*(0:0:2:0) 80ee:beef:0000:0000 rev 0, Mem @ 0xe0000000/134217728, BIOS @ 0x????????/131072
[   706.408] Initializing built-in extension Generic Event Extension
[   706.408] Initializing built-in extension SHAPE
[   706.408] Initializing built-in extension MIT-SHM
[   706.408] Initializing built-in extension XInputExtension
[   706.408] Initializing built-in extension XTEST
[   706.408] Initializing built-in extension BIG-REQUESTS
[   706.408] Initializing built-in extension SYNC
[   706.408] Initializing built-in extension XKEYBOARD
[   706.408] Initializing built-in extension XC-MISC
[   706.408] Initializing built-in extension XINERAMA
[   706.408] Initializing built-in extension XFIXES
[   706.408] Initializing built-in extension RENDER
[   706.408] Initializing built-in extension RANDR
[   706.408] Initializing built-in extension COMPOSITE
[   706.408] Initializing built-in extension DAMAGE
[   706.408] Initializing built-in extension MIT-SCREEN-SAVER
[   706.408] Initializing built-in extension DOUBLE-BUFFER
[   706.408] Initializing built-in extension RECORD
[   706.408] Initializing built-in extension DPMS
[   706.408] Initializing built-in extension X-Resource
[   706.408] Initializing built-in extension XVideo
[   706.408] Initializing built-in extension XVideo-MotionCompensation
[   706.408] Initializing built-in extension SELinux
[   706.408] Initializing built-in extension XFree86-VidModeExtension
[   706.408] Initializing built-in extension XFree86-DGA
[   706.408] Initializing built-in extension XFree86-DRI
[   706.408] Initializing built-in extension DRI2
[   706.408] (II) "glx" will be loaded by default.
[   706.408] (II) LoadModule: "dri2"
[   706.408] (II) Module "dri2" already built-in
[   706.408] (II) LoadModule: "glamoregl"
[   706.408] (II) Loading /usr/lib64/xorg/modules/libglamoregl.so
[   706.409] (II) Module glamoregl: vendor="X.Org Foundation"
[   706.409]    compiled for 1.14.0, module version = 0.5.0
[   706.409]    ABI class: X.Org ANSI C Emulation, version 0.4
[   706.409] (II) LoadModule: "glx"
[   706.410] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[   706.410] (II) Module glx: vendor="X.Org Foundation"
[   706.410]    compiled for 1.14.4, module version = 1.0.0
[   706.410]    ABI class: X.Org Server Extension, version 7.0
[   706.410] (==) AIGLX enabled
[   706.410] Loading extension GLX
[   706.410] (==) Matched vboxvideo as autoconfigured driver 0
[   706.410] (==) Matched vboxvideo as autoconfigured driver 1
[   706.410] (==) Matched vesa as autoconfigured driver 2
[   706.410] (==) Matched modesetting as autoconfigured driver 3
[   706.410] (==) Matched fbdev as autoconfigured driver 4
[   706.410] (==) Assigned the driver to the xf86ConfigLayout
[   706.410] (II) LoadModule: "vboxvideo"
[   706.410] (II) Loading /usr/lib64/xorg/modules/drivers/vboxvideo_drv.so
[   706.410] (II) Module vboxvideo: vendor="Oracle Corporation"
[   706.410]    compiled for 10.14.0, module version = 1.0.1
[   706.410]    Module class: X.Org Video Driver
[   706.410]    ABI class: X.Org Video Driver, version 14.1
[   706.410] (**) Load address of symbol "VBOXVIDEO" is 0x7f421915c3c0
[   706.410] (II) LoadModule: "vesa"
[   706.410] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
[   706.410] (II) Module vesa: vendor="X.Org Foundation"
[   706.410]    compiled for 1.14.0, module version = 2.3.2
[   706.410]    Module class: X.Org Video Driver
[   706.410]    ABI class: X.Org Video Driver, version 14.1
[   706.410] (II) LoadModule: "modesetting"
[   706.411] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[   706.411] (II) Module modesetting: vendor="X.Org Foundation"
[   706.411]    compiled for 1.14.3, module version = 0.8.0
[   706.411]    Module class: X.Org Video Driver
[   706.411]    ABI class: X.Org Video Driver, version 14.1
[   706.411] (II) LoadModule: "fbdev"
[   706.411] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
[   706.411] (II) Module fbdev: vendor="X.Org Foundation"
[   706.411]    compiled for 1.14.0, module version = 0.4.3
[   706.411]    Module class: X.Org Video Driver
[   706.411]    ABI class: X.Org Video Driver, version 14.1
[   706.411] (II) VBoxVideo: guest driver for VirtualBox: vbox
[   706.411] (II) VESA: driver for VESA chipsets: vesa
[   706.411] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[   706.411] (II) FBDEV: driver for framebuffer: fbdev
[   706.411] (++) using VT number 1

[   706.414] (WW) Falling back to old probe method for vesa
[   706.414] (WW) Falling back to old probe method for modesetting
[   706.414] (WW) Falling back to old probe method for fbdev
[   706.414] (II) Loading sub module "fbdevhw"
[   706.414] (II) LoadModule: "fbdevhw"
[   706.414] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
[   706.414] (II) Module fbdevhw: vendor="X.Org Foundation"
[   706.414]    compiled for 1.14.4, module version = 0.0.2
[   706.414]    ABI class: X.Org Video Driver, version 14.1
[   706.414] (EE) open /dev/fb0: No such file or directory
[   706.414] (II) VBoxVideo(0): VirtualBox guest additions video driver version 4.3.53_OSE
[   706.414] (II) Loading sub module "ramdac"
[   706.414] (II) LoadModule: "ramdac"
[   706.414] (II) Module "ramdac" already built-in
[   706.414] (II) Loading sub module "fb"
[   706.414] (II) LoadModule: "fb"
[   706.414] (II) Loading /usr/lib64/xorg/modules/libfb.so
[   706.416] (II) Module fb: vendor="X.Org Foundation"
[   706.416]    compiled for 1.14.4, module version = 1.0.0
[   706.416]    ABI class: X.Org ANSI C Emulation, version 0.4
[   706.416] (II) Loading sub module "shadowfb"
[   706.416] (II) LoadModule: "shadowfb"
[   706.416] (II) Loading /usr/lib64/xorg/modules/libshadowfb.so
[   706.416] (II) Module shadowfb: vendor="X.Org Foundation"
[   706.416]    compiled for 1.14.4, module version = 1.0.0
[   706.416]    ABI class: X.Org ANSI C Emulation, version 0.4
[   706.416] (II) Loading sub module "vgahw"
[   706.416] (II) LoadModule: "vgahw"
[   706.416] (II) Loading /usr/lib64/xorg/modules/libvgahw.so
[   706.416] (II) Module vgahw: vendor="X.Org Foundation"
[   706.416]    compiled for 1.14.4, module version = 0.1.0
[   706.416]    ABI class: X.Org Video Driver, version 14.1
[   706.416] (II) Loading sub module "dri2"
[   706.416] (II) LoadModule: "dri2"
[   706.416] (II) Module "dri2" already built-in
[   706.417] (II) VBoxVideo(0): Creating default Display subsection in Screen section
        "Default Screen Section" for depth/fbbpp 24/32
[   706.417] (==) VBoxVideo(0): Depth 24, (--) framebuffer bpp 32
[   706.417] (--) VBoxVideo(0): Virtual size is 32000x32000 (pitch 32000)
[   706.417] (**) VBoxVideo(0):  Built-in mode "1024x768": 47.8 MHz (scaled from 0.0 MHz), 46.4 kHz, 60.0 Hz
[   706.417] (II) VBoxVideo(0): Modeline "1024x768"x0.0   47.83  1024 1026 1028 1030  768 770 772 774 (46.4 kHz b)
[   706.417] (**) VBoxVideo(0):  Built-in mode "1024x768": 47.8 MHz (scaled from 0.0 MHz), 46.4 kHz, 60.0 Hz
[   706.417] (II) VBoxVideo(0): Modeline "1024x768"x0.0   47.83  1024 1026 1028 1030  768 770 772 774 (46.4 kHz b)
[   706.417] (**) VBoxVideo(0):  Built-in mode "1600x1200": 116.2 MHz (scaled from 0.0 MHz), 72.4 kHz, 60.0 Hz
[   706.417] (II) VBoxVideo(0): Modeline "1600x1200"x0.0  116.21  1600 1602 1604 1606  1200 1202 1204 1206 (72.4 kHz b)
[   706.417] (**) VBoxVideo(0):  Built-in mode "1440x1050": 91.6 MHz (scaled from 0.0 MHz), 63.4 kHz, 60.0 Hz
[   706.417] (II) VBoxVideo(0): Modeline "1440x1050"x0.0   91.62  1440 1442 1444 1446  1050 1052 1054 1056 (63.4 kHz b)
[   706.417] (**) VBoxVideo(0):  Built-in mode "1280x960": 74.5 MHz (scaled from 0.0 MHz), 58.0 kHz, 60.0 Hz
[   706.417] (II) VBoxVideo(0): Modeline "1280x960"x0.0   74.54  1280 1282 1284 1286  960 962 964 966 (58.0 kHz b)
[   706.417] (**) VBoxVideo(0):  Built-in mode "1024x768": 47.8 MHz (scaled from 0.0 MHz), 46.4 kHz, 60.0 Hz
[   706.417] (II) VBoxVideo(0): Modeline "1024x768"x0.0   47.83  1024 1026 1028 1030  768 770 772 774 (46.4 kHz b)
[   706.417] (**) VBoxVideo(0):  Built-in mode "800x600": 29.3 MHz (scaled from 0.0 MHz), 36.4 kHz, 60.0 Hz
[   706.417] (II) VBoxVideo(0): Modeline "800x600"x0.0   29.31  800 802 804 806  600 602 604 606 (36.4 kHz b)
[   706.417] (**) VBoxVideo(0):  Built-in mode "640x480": 18.8 MHz (scaled from 0.0 MHz), 29.2 kHz, 60.0 Hz
[   706.417] (II) VBoxVideo(0): Modeline "640x480"x0.0   18.84  640 642 644 646  480 482 484 486 (29.2 kHz b)
[   706.417] (II) VBoxVideo(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
[   706.417] (==) VBoxVideo(0): RGB weight 888
[   706.417] (==) VBoxVideo(0): Default visual is TrueColor
[   706.417] (==) VBoxVideo(0): Using gamma correction (1.0, 1.0, 1.0)
[   706.417] (==) VBoxVideo(0): DPI set to (96, 96)
[   706.417] (II) UnloadModule: "vesa"
[   706.417] (II) Unloading vesa
[   706.417] (II) UnloadModule: "modesetting"
[   706.417] (II) Unloading modesetting
[   706.417] (II) UnloadModule: "fbdev"
[   706.417] (II) Unloading fbdev
[   706.417] (II) UnloadSubModule: "fbdevhw"
[   706.417] (II) Unloading fbdevhw
[   706.417] (--) Depth 24 pixmap format is 32 bpp
[   706.778] (II) VBoxVideo(0): [DRI2] Setup complete
[   706.779] (II) VBoxVideo(0): [DRI2]   DRI driver: vboxvideo
[   706.779] (II) VBoxVideo(0): Requested monitor count: 1
[   706.779] (II) VBoxVideo(0): Output VGA-0 has no monitor section
[   706.779] (II) VBoxVideo(0): Output VGA-0 has no monitor section
[   706.779] (II) VBoxVideo(0): EDID for output VGA-0
[   706.779] (II) VBoxVideo(0): Manufacturer: VBX  Model: 0  Serial#: 50332672
[   706.779] (II) VBoxVideo(0): Year: 1990  Week: 1
[   706.779] (II) VBoxVideo(0): EDID Version: 1.3
[   706.779] (II) VBoxVideo(0): Digital Display Input
[   706.779] (II) VBoxVideo(0): Indeterminate output size
[   706.779] (II) VBoxVideo(0): Gamma: 2.20
[   706.779] (II) VBoxVideo(0): DPMS capabilities: StandBy Suspend Off
[   706.779] (II) VBoxVideo(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[   706.779] (II) VBoxVideo(0): Default color space is primary color space
[   706.779] (II) VBoxVideo(0): First detailed timing is preferred mode
[   706.779] (II) VBoxVideo(0): redX: 0.640 redY: 0.330   greenX: 0.300 greenY: 0.600
[   706.779] (II) VBoxVideo(0): blueX: 0.150 blueY: 0.060   whiteX: 0.312 whiteY: 0.329
[   706.779] (II) VBoxVideo(0): Manufacturer's mask: 0
[   706.779] (II) VBoxVideo(0): Supported detailed timing:
[   706.779] (II) VBoxVideo(0): clock: 47.8 MHz   Image Size:  0 x 0 mm
[   706.779] (II) VBoxVideo(0): h_active: 1024  h_sync: 1026  h_sync_end 1028 h_blank_end 1030 h_border: 0
[   706.779] (II) VBoxVideo(0): v_active: 768  v_sync: 770  v_sync_end 772 v_blanking: 774 v_border: 0
[   706.779] (II) VBoxVideo(0): Ranges: V min: 0 V max: 200 Hz, H min: 0 H max: 200 kHz, PixClock max 1005 MHz
[   706.779] (II) VBoxVideo(0): Monitor name: VBOX monitor
[   706.779] (II) VBoxVideo(0): EDID (in hex):
[   706.779] (II) VBoxVideo(0):         00ffffffffffff005858000000040003
[   706.779] (II) VBoxVideo(0):         0100010380000078eeee91a3544c9926
[   706.779] (II) VBoxVideo(0):         0f505400000001010101010101010101
[   706.779] (II) VBoxVideo(0):         010101010101af120006400006300202
[   706.779] (II) VBoxVideo(0):         2200000000000000000000fd0000c800
[   706.779] (II) VBoxVideo(0):         c864000a202020202020000000fc0056
[   706.779] (II) VBoxVideo(0):         424f58206d6f6e69746f720a00000010
[   706.779] (II) VBoxVideo(0):         000a20202020202020202020202000fb
[   706.779] (II) VBoxVideo(0): Printing probed modes for output VGA-0
[   706.779] (II) VBoxVideo(0): Modeline "1024x768"x60.0   47.83  1024 1026 1028 1030  768 770 772 774 (46.4 kHz Pb)
[   706.779] (II) VBoxVideo(0): Modeline "1600x1200"x60.0  116.21  1600 1602 1604 1606  1200 1202 1204 1206 (72.4 kHz b)
[   706.779] (II) VBoxVideo(0): Modeline "1440x1050"x60.0   91.62  1440 1442 1444 1446  1050 1052 1054 1056 (63.4 kHz b)
[   706.779] (II) VBoxVideo(0): Modeline "1280x960"x60.0   74.54  1280 1282 1284 1286  960 962 964 966 (58.0 kHz b)
[   706.779] (II) VBoxVideo(0): Modeline "1024x768"x60.0   47.83  1024 1026 1028 1030  768 770 772 774 (46.4 kHz b)
[   706.779] (II) VBoxVideo(0): Modeline "800x600"x60.0   29.31  800 802 804 806  600 602 604 606 (36.4 kHz b)
[   706.779] (II) VBoxVideo(0): Modeline "640x480"x60.0   18.84  640 642 644 646  480 482 484 486 (29.2 kHz b)
[   706.779] (II) VBoxVideo(0): Output VGA-0 connected
[   706.779] (II) VBoxVideo(0): Using exact sizes for initial modes
[   706.779] (II) VBoxVideo(0): Output VGA-0 using initial mode 1024x768 +0+0
[   706.779] (II) VBoxVideo(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[   706.779] (II) VBoxVideo(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   706.779] (==) VBoxVideo(0): DPMS enabled
[   706.780] (--) RandR disabled
[   706.782] (II) SELinux: Disabled on system
[   706.783] (II) Next line is added to allow vboxvideo_drv.so to appear as whitelisted driver
[   706.783] (II) The file referenced, is *NOT* loaded
[   706.783] (II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so
[   706.783] (EE) AIGLX error: vboxvideo does not export required DRI extension
[   706.783] (EE) AIGLX: reverting to software rendering
[   706.783] (II) AIGLX: Screen 0 is not DRI capable
[   706.787] (II) AIGLX: Loaded and initialized swrast
[   706.787] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[   706.787] (II) VBoxVideo(0): Setting screen physical size to 270 x 203
[   706.812] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[   706.812] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   706.812] (**) Power Button: Applying InputClass "system-keyboard"
[   706.812] (II) LoadModule: "evdev"
[   706.813] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[   706.813] (II) Module evdev: vendor="X.Org Foundation"
[   706.813]    compiled for 1.14.2, module version = 2.8.1
[   706.813]    Module class: X.Org XInput Driver
[   706.813]    ABI class: X.Org XInput driver, version 19.1
[   706.813] (II) Using input driver 'evdev' for 'Power Button'
[   706.813] (**) Power Button: always reports core events
[   706.813] (**) evdev: Power Button: Device: "/dev/input/event0"
[   706.813] (--) evdev: Power Button: Vendor 0 Product 0x1
[   706.813] (--) evdev: Power Button: Found keys
[   706.813] (II) evdev: Power Button: Configuring as keyboard
[   706.813] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0/event0"
[   706.813] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   706.813] (**) Option "xkb_rules" "evdev"
[   706.813] (**) Option "xkb_model" "pc104"
[   706.813] (**) Option "xkb_layout" "it,us"
[   706.813] (**) Option "xkb_variant" ","
[   706.828] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[   706.828] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[   706.828] (**) Sleep Button: Applying InputClass "system-keyboard"
[   706.828] (II) Using input driver 'evdev' for 'Sleep Button'
[   706.828] (**) Sleep Button: always reports core events
[   706.828] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[   706.828] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[   706.828] (--) evdev: Sleep Button: Found keys
[   706.828] (II) evdev: Sleep Button: Configuring as keyboard
[   706.828] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSLPBN:00/input/input1/event1"
[   706.828] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 7)
[   706.828] (**) Option "xkb_rules" "evdev"
[   706.828] (**) Option "xkb_model" "pc104"
[   706.828] (**) Option "xkb_layout" "it,us"
[   706.828] (**) Option "xkb_variant" ","
[   706.829] (II) config/udev: Adding drm device (/dev/dri/card0)
[   706.829] (II) config/udev: Adding input device VirtualBox mouse integration (/dev/input/event5)
[   706.829] (**) VirtualBox mouse integration: Applying InputClass "evdev pointer catchall"
[   706.829] (II) Using input driver 'evdev' for 'VirtualBox mouse integration'
[   706.829] (**) VirtualBox mouse integration: always reports core events
[   706.829] (**) evdev: VirtualBox mouse integration: Device: "/dev/input/event5"
[   706.829] (--) evdev: VirtualBox mouse integration: Vendor 0x80ee Product 0xcafe
[   706.829] (--) evdev: VirtualBox mouse integration: Found 1 mouse buttons
[   706.829] (--) evdev: VirtualBox mouse integration: Found absolute axes
[   706.829] (--) evdev: VirtualBox mouse integration: Found x and y absolute axes
[   706.829] (--) evdev: VirtualBox mouse integration: Found absolute touchscreen
[   706.829] (II) evdev: VirtualBox mouse integration: Configuring as touchscreen
[   706.829] (**) evdev: VirtualBox mouse integration: YAxisMapping: buttons 4 and 5
[   706.829] (**) evdev: VirtualBox mouse integration: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   706.829] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/input/input6/event5"
[   706.829] (II) XINPUT: Adding extended input device "VirtualBox mouse integration" (type: TOUCHSCREEN, id 8)
[   706.829] (II) evdev: VirtualBox mouse integration: initialized for absolute axes.
[   706.829] (**) VirtualBox mouse integration: (accel) keeping acceleration scheme 1
[   706.829] (**) VirtualBox mouse integration: (accel) acceleration profile 0
[   706.829] (**) VirtualBox mouse integration: (accel) acceleration factor: 2.000
[   706.829] (**) VirtualBox mouse integration: (accel) acceleration threshold: 4
[   706.829] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/event4)
[   706.829] (**) VirtualBox USB Tablet: Applying InputClass "evdev pointer catchall"
[   706.829] (II) Using input driver 'evdev' for 'VirtualBox USB Tablet'
[   706.829] (**) VirtualBox USB Tablet: always reports core events
[   706.829] (**) evdev: VirtualBox USB Tablet: Device: "/dev/input/event4"
[   706.829] (--) evdev: VirtualBox USB Tablet: Vendor 0x80ee Product 0x21
[   706.829] (--) evdev: VirtualBox USB Tablet: Found 9 mouse buttons
[   706.829] (--) evdev: VirtualBox USB Tablet: Found scroll wheel(s)
[   706.829] (--) evdev: VirtualBox USB Tablet: Found relative axes
[   706.829] (--) evdev: VirtualBox USB Tablet: Found absolute axes
[   706.829] (--) evdev: VirtualBox USB Tablet: Found x and y absolute axes
[   706.829] (--) evdev: VirtualBox USB Tablet: Found absolute touchscreen
[   706.829] (II) evdev: VirtualBox USB Tablet: Configuring as touchscreen
[   706.829] (II) evdev: VirtualBox USB Tablet: Adding scrollwheel support
[   706.829] (**) evdev: VirtualBox USB Tablet: YAxisMapping: buttons 4 and 5
[   706.829] (**) evdev: VirtualBox USB Tablet: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   706.829] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:06.0/usb2/2-1/2-1:1.0/0003:80EE:0021.0001/input/input5/event4"
[   706.829] (II) XINPUT: Adding extended input device "VirtualBox USB Tablet" (type: TOUCHSCREEN, id 9)
[   706.829] (WW) evdev: VirtualBox USB Tablet: touchpads, tablets and touchscreens ignore relative axes.
[   706.829] (II) evdev: VirtualBox USB Tablet: initialized for absolute axes.
[   706.829] (**) VirtualBox USB Tablet: (accel) keeping acceleration scheme 1
[   706.829] (**) VirtualBox USB Tablet: (accel) acceleration profile 0
[   706.829] (**) VirtualBox USB Tablet: (accel) acceleration factor: 2.000
[   706.829] (**) VirtualBox USB Tablet: (accel) acceleration threshold: 4
[   706.830] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/mouse1)
[   706.830] (II) No input driver specified, ignoring this device.
[   706.830] (II) This device may have been added with another device file.
[   706.830] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[   706.830] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[   706.830] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[   706.830] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[   706.830] (**) AT Translated Set 2 keyboard: always reports core events
[   706.830] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event2"
[   706.830] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[   706.830] (--) evdev: AT Translated Set 2 keyboard: Found keys
[   706.830] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[   706.830] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[   706.830] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[   706.830] (**) Option "xkb_rules" "evdev"
[   706.830] (**) Option "xkb_model" "pc104"
[   706.830] (**) Option "xkb_layout" "it,us"
[   706.830] (**) Option "xkb_variant" ","
[   706.830] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/event3)
[   706.830] (**) ImExPS/2 Generic Explorer Mouse: Applying InputClass "evdev pointer catchall"
[   706.830] (II) Using input driver 'evdev' for 'ImExPS/2 Generic Explorer Mouse'
[   706.830] (**) ImExPS/2 Generic Explorer Mouse: always reports core events
[   706.830] (**) evdev: ImExPS/2 Generic Explorer Mouse: Device: "/dev/input/event3"
[   706.830] (--) evdev: ImExPS/2 Generic Explorer Mouse: Vendor 0x2 Product 0x6
[   706.830] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found 9 mouse buttons
[   706.830] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found scroll wheel(s)
[   706.830] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found relative axes
[   706.830] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found x and y relative axes
[   706.830] (II) evdev: ImExPS/2 Generic Explorer Mouse: Configuring as mouse
[   706.830] (II) evdev: ImExPS/2 Generic Explorer Mouse: Adding scrollwheel support
[   706.830] (**) evdev: ImExPS/2 Generic Explorer Mouse: YAxisMapping: buttons 4 and 5
[   706.830] (**) evdev: ImExPS/2 Generic Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   706.830] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input4/event3"
[   706.830] (II) XINPUT: Adding extended input device "ImExPS/2 Generic Explorer Mouse" (type: MOUSE, id 11)
[   706.830] (II) evdev: ImExPS/2 Generic Explorer Mouse: initialized for relative axes.
[   706.830] (**) ImExPS/2 Generic Explorer Mouse: (accel) keeping acceleration scheme 1
[   706.830] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration profile 0
[   706.830] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration factor: 2.000
[   706.830] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration threshold: 4
[   706.830] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/mouse0)
[   706.830] (II) No input driver specified, ignoring this device.
[   706.830] (II) This device may have been added with another device file.
[   712.173] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[   712.173] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1024x768 Warning: We only handle separate sync.
[   712.173] (II) VBoxVideo(0): Using hsync ranges from config file
[   712.173] (II) VBoxVideo(0): Using vrefresh ranges from config file
[   712.173] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[   712.173] (II) VBoxVideo(0): Modeline "1024x768"x0.0   47.83  1024 1026 1028 1030  768 770 772 774 -hsync -vsync (46.4 kHz eP)
[   712.304] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[   712.304] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1024x768 Warning: We only handle separate sync.
[   712.304] (II) VBoxVideo(0): Using hsync ranges from config file
[   712.304] (II) VBoxVideo(0): Using vrefresh ranges from config file
[   712.304] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[   712.304] (II) VBoxVideo(0): Modeline "1024x768"x0.0   47.83  1024 1026 1028 1030  768 770 772 774 -hsync -vsync (46.4 kHz eP)
[   712.643] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[   712.643] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1024x768 Warning: We only handle separate sync.
[   712.643] (II) VBoxVideo(0): Using hsync ranges from config file
[   712.643] (II) VBoxVideo(0): Using vrefresh ranges from config file
[   712.643] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[   712.643] (II) VBoxVideo(0): Modeline "1024x768"x0.0   47.83  1024 1026 1028 1030  768 770 772 774 -hsync -vsync (46.4 kHz eP)
[   717.875] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[   717.875] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1024x768 Warning: We only handle separate sync.
[   717.875] (II) VBoxVideo(0): Using hsync ranges from config file
[   717.875] (II) VBoxVideo(0): Using vrefresh ranges from config file
[   717.875] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[   717.875] (II) VBoxVideo(0): Modeline "1024x768"x0.0   47.83  1024 1026 1028 1030  768 770 772 774 -hsync -vsync (46.4 kHz eP)
[   717.877] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[   717.877] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1024x768 Warning: We only handle separate sync.
[   717.877] (II) VBoxVideo(0): Using hsync ranges from config file
[   717.877] (II) VBoxVideo(0): Using vrefresh ranges from config file
[   717.877] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[   717.877] (II) VBoxVideo(0): Modeline "1024x768"x0.0   47.83  1024 1026 1028 1030  768 770 772 774 -hsync -vsync (46.4 kHz eP)
[   718.044] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[   718.044] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1024x768 Warning: We only handle separate sync.
[   718.044] (II) VBoxVideo(0): Using hsync ranges from config file
[   718.044] (II) VBoxVideo(0): Using vrefresh ranges from config file
[   718.044] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[   718.044] (II) VBoxVideo(0): Modeline "1024x768"x0.0   47.83  1024 1026 1028 1030  768 770 772 774 -hsync -vsync (46.4 kHz eP)
[   718.255] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[   718.255] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1024x768 Warning: We only handle separate sync.
[   718.255] (II) VBoxVideo(0): Using hsync ranges from config file
[   718.256] (II) VBoxVideo(0): Using vrefresh ranges from config file
[   718.256] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[   718.256] (II) VBoxVideo(0): Modeline "1024x768"x0.0   47.83  1024 1026 1028 1030  768 770 772 774 -hsync -vsync (46.4 kHz eP)
[   718.385] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[   718.385] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1024x768 Warning: We only handle separate sync.
[   718.385] (II) VBoxVideo(0): Using hsync ranges from config file
[   718.385] (II) VBoxVideo(0): Using vrefresh ranges from config file
[   718.385] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[   718.385] (II) VBoxVideo(0): Modeline "1024x768"x0.0   47.83  1024 1026 1028 1030  768 770 772 774 -hsync -vsync (46.4 kHz eP)
[   718.597] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[   718.597] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1024x768 Warning: We only handle separate sync.
[   718.597] (II) VBoxVideo(0): Using hsync ranges from config file
[   718.597] (II) VBoxVideo(0): Using vrefresh ranges from config file
[   718.597] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[   718.597] (II) VBoxVideo(0): Modeline "1024x768"x0.0   47.83  1024 1026 1028 1030  768 770 772 774 -hsync -vsync (46.4 kHz eP)
[root@localhost log]#


and this is the VirtualBox host log (several attempts where made)

http://pastebin.com/kLpvLKV1

This isssue has popped out here and there in the past, googling with "Intel HD drivers virtualbox crash" will show some threads
Bye
Menion
 
Posts: 17
Joined: 5. Nov 2014, 13:49

Re: Trunk linux guest addons issue

Postby Perryg » 7. Nov 2014, 15:48

I would say that the guest additions you have just built will not have a chance of fixing your issues unless you also install the host code. SVN is the next new "feature" major build and not surprisingly usually don't work properly with current release builds.

I would actually try version 4.3.12 and its associated guest additions & extension pack to resolve issues with Fedora 19 especially on a Windows host.
Perryg
Site Moderator
 
Posts: 34373
Joined: 6. Sep 2008, 22:55
Primary OS: Linux other
VBox Version: OSE self-compiled
Guest OSses: *NIX

Re: Trunk linux guest addons issue

Postby Menion » 11. Nov 2014, 12:21

Yes, version 4.3.12 works
Bye
Menion
 
Posts: 17
Joined: 5. Nov 2014, 13:49


Return to VirtualBox OSE

Who is online

Users browsing this forum: No registered users and 1 guest