Can anyone point me to more information on using the internal TFTP server to do a pxe boot? The manual is rather terse on that subject (https://www.virtualbox.org/manual/ch06.html#nat-tftp)
My VM is called netboteur so I have set up a TFTP directory in the same directory as netboteur.xml.In that directory I have put netboteur.pxe.
When iPXE boots up it looks good, then fails with a permission denied error (see screenshot). I've set up permissions on netboteur.pxe and the TFTP directory to be readable by all. Using the iPXE command line I can fetch the iPXE 'demo' file from across the internet (http://boot.ipxe.org/demo/boot.php) so I believe that side of things is OK.
Am I missing something?
I am using Windows 10 64-bit and VirtualBox Version 5.1.4 r110228 (Qt5.5.1). My VM is set up with a single PCnet-Fast III adapter attached to NAT.
pxe boot via TFTP internal server
-
- Posts: 25
- Joined: 15. Feb 2014, 10:43
pxe boot via TFTP internal server
- Attachments
-
- screenshot
- VirtualBox_netboteur_02_09_2016_14_34_10.png (8.15 KiB) Viewed 7551 times
Re: pxe boot via TFTP internal server
I am using VirtualBox 5.1.16 on RHEL 6 with a Win7 guest. It worked well before. But suddenly I got the exactly same problem, any ideas?
Thanks,
Ted
Thanks,
Ted
Re: pxe boot via TFTP internal server
I created a new VM and attached the existing .vdi file. It works again.
I am not sure what was going on, but hope it will help people who have the same problems.
I am not sure what was going on, but hope it will help people who have the same problems.
-
- Posts: 1
- Joined: 12. Feb 2018, 09:20
Re: pxe boot via TFTP internal server
I got similar problem and solved it like this.
in your root TFTP folder where pxelinux.cfg folder is, you need to create a symlink for your virtual box machine that will be checked when booted, in my case i made a symlink from "./TFTP/pxelinux.cfg/default" file to "./TFTP/MyVirtualBoxMachineName.pxe", keep in mind that ",pxe" extension for symlink is crucial. Also you might want to check your ownership of files like chmod 775 in "./TFTP" and "./TFTP/pxelinux.cfg"
Hope this helps someone.
in your root TFTP folder where pxelinux.cfg folder is, you need to create a symlink for your virtual box machine that will be checked when booted, in my case i made a symlink from "./TFTP/pxelinux.cfg/default" file to "./TFTP/MyVirtualBoxMachineName.pxe", keep in mind that ",pxe" extension for symlink is crucial. Also you might want to check your ownership of files like chmod 775 in "./TFTP" and "./TFTP/pxelinux.cfg"
Hope this helps someone.
-
- Posts: 25
- Joined: 15. Feb 2014, 10:43
Re: pxe boot via TFTP internal server
Wow. I have no idea now what I was even trying to do back in 2016! Anyway thanks for the tip, I am sure it will be helpful as the VB manual still does not have much info on the subject.