Hi,
How to configure Dual Booting i.e. How to install Windows 10 + ubuntu or likewise and dual boot the VM. ?
How to configure Dual Booting
-
- Posts: 428
- Joined: 2. May 2010, 14:19
- Primary OS: Fedora other
- VBox Version: PUEL
- Guest OSses: Windows, Linux, other Unixes
- Location: Artem S. Tashkinov
- Contact:
Re: How to configure Dual Booting
Your question/problem is really hard to understand.
Re: How to configure Dual Booting
I want to install dual OS in a VM and then after it will ask from which OS to boot. Hope it is clear
-
- Volunteer
- Posts: 825
- Joined: 14. Sep 2019, 16:51
- Primary OS: Mac OS X other
- VBox Version: PUEL
- Guest OSses: WIN11,10, 7, Linux (various)
- Location: United Kingdom
Re: How to configure Dual Booting
Not sure that this is possible, or of what practical use it would be other than the challenge of doing something that is beyond the normal use case. First challenge, all VMs are set up using a single Template designed to assist in installing a named OS. There are various different Templates for different Windows and Linux versions etc.; and Windows and Linux Templates also have some other significant differences, for example, different virtual graphics cards.
Virtualisation is generally promoted as a an alternative to dual-boot because of the advantages of being able to run multiple OSs at the same time (providing the host computer has sufficient resource). Dual Boot is always an either or choice which slows down the boot process, so what would be the point of doing that in a VM.
You could, of course, simply try using the standard dual boot set up procedure, i.e. Windows first and then try to install Linux alongside without destroying the Windows setup.
Did a Google Search to see if there were any obvious results for any virtuaisation software. Result "0" matches.
Virtualisation is generally promoted as a an alternative to dual-boot because of the advantages of being able to run multiple OSs at the same time (providing the host computer has sufficient resource). Dual Boot is always an either or choice which slows down the boot process, so what would be the point of doing that in a VM.
You could, of course, simply try using the standard dual boot set up procedure, i.e. Windows first and then try to install Linux alongside without destroying the Windows setup.
Did a Google Search to see if there were any obvious results for any virtuaisation software. Result "0" matches.
Re: How to configure Dual Booting
I had googled but there no such videos that exactly matches my requirement.
-
- Volunteer
- Posts: 825
- Joined: 14. Sep 2019, 16:51
- Primary OS: Mac OS X other
- VBox Version: PUEL
- Guest OSses: WIN11,10, 7, Linux (various)
- Location: United Kingdom
Re: How to configure Dual Booting
Exactly! The internet community obviously see little or no need/possibility, or there would be numerous 'Tutorials'.
-
- Site Moderator
- Posts: 20945
- Joined: 30. Dec 2009, 20:14
- Primary OS: MS Windows 10
- VBox Version: PUEL
- Guest OSses: Windows, Linux
Re: How to configure Dual Booting
If one wants to test dual-boot, a VM could be a good place to do it, especially if one cannot or does not want to change their one physical PC to do it. This is a good idea to try, though it is not done much.
A VM is essentially another PC. So you'd do the same to a VM that you'd do to the PC.
I have only ever heard of installing Windows first then Linux, so this method is tuned to that scenario. But Linux first then Windows might be possible: a web-search could determine this.
Put the Windows installer ISO into the VM's optical drive. Start the VM and install Windows, being careful to adjust the partitions in the Windows Installer to allow enough unused partition space for the Linux install.
Once Windows is installed, put the Linux installer ISO into the VM's optical drive. Start the VM and install Linux in a dual-boot configuration, per the Linux OS's normal methods.
I would use legacy BIOS instead of EFI for this.
A VM is essentially another PC. So you'd do the same to a VM that you'd do to the PC.
I have only ever heard of installing Windows first then Linux, so this method is tuned to that scenario. But Linux first then Windows might be possible: a web-search could determine this.
Put the Windows installer ISO into the VM's optical drive. Start the VM and install Windows, being careful to adjust the partitions in the Windows Installer to allow enough unused partition space for the Linux install.
Once Windows is installed, put the Linux installer ISO into the VM's optical drive. Start the VM and install Linux in a dual-boot configuration, per the Linux OS's normal methods.
I would use legacy BIOS instead of EFI for this.
-
- Volunteer
- Posts: 5677
- Joined: 14. Feb 2019, 03:06
- Primary OS: Mac OS X other
- VBox Version: PUEL
- Guest OSses: Linux, Windows 10, ...
- Location: Germany
Re: How to configure Dual Booting
In a VM, it works the same as on a physical PC:scottgus1 wrote:I have only ever heard of installing Windows first then Linux, so this method is tuned to that scenario. But Linux first then Windows might be possible: a web-search could determine this.
When Windows has been installed first and Linux is being installed second, it usually overwrites the Windows MBR (Master Boot Record), but integrates the already installed Windows OS in the Linux boot manager itself.
When Linux has been installed first and Windows is being installed second, it usually overwrites the Linux MBR (Master Boot Record), but does not integrate the already installed Linux OS in the Windows boot manager. In consequence, you'll either have to integrate the already installed Linux OS in the Windows boot manager yourself, or restore the Linux MBR and integrate the already installed Windows OS in the Linux boot manager.