Discuss the VirtualBox 7.0.6 release

This is for discussing general topics about how to use VirtualBox.
scottgus1
Site Moderator
Posts: 20965
Joined: 30. Dec 2009, 20:14
Primary OS: MS Windows 10
VBox Version: PUEL
Guest OSses: Windows, Linux

Re: Discuss the VirtualBox 7.0.6 release

Post by scottgus1 »

FranceBB, thanks for this report! I moved it out of the Beta forum, since 7.0 is technically out of beta, though bug-hunting is still very much going on. I understand that the devs may be monitoring the "Discuss" topics, so I put it here.

Please make a Bugtracker ticket about this, with a zipped log attached.
Simple07
Posts: 133
Joined: 5. Nov 2014, 16:05

VBox 155730 Black Screen on Windows XP

Post by Simple07 »

I have installed Virtual Box 7.0.97-155730, it seemed fine initially, but after installing GuestAdditions Windows XP boots into a black screen. To uninstall GuestAdditions, I had to force shutdown the VM, then change the display setting from VBoxVGA to VMSVGA, then uninstall GuestAdditions.

Note: installing GuestAdditions 7.0.7-155584 did not help, still got black screen. But installing GuestAdditions 7.0.6-155176 worked, the screen is visible and can be resized easily !!!

BTW, GuestAdditions 7.0.97-155730 works fine on Windows 7 (32bit) even if the display is set to VBoxVGA.
scottgus1
Site Moderator
Posts: 20965
Joined: 30. Dec 2009, 20:14
Primary OS: MS Windows 10
VBox Version: PUEL
Guest OSses: Windows, Linux

Re: Discuss the VirtualBox 7.0.6 release

Post by scottgus1 »

Simple07, thanks for this report! I moved it out of the Beta forum, since 7.0 is technically out of beta, though bug-hunting is still very much going on. I understand that the devs may be monitoring the "Discuss" topics, so I put it here.

Please make a Bugtracker ticket about this, with a zipped log attached.
adamf663b
Posts: 13
Joined: 6. Oct 2015, 18:38

Re: Discuss the VirtualBox 7.0.6 release

Post by adamf663b »

I am probably going to dump virtualbox 7.0.x and wait for 7.1.
It can't get through a whole minute running ubuntu (guest) without crashing.
mingle
Posts: 62
Joined: 6. Jun 2015, 07:55

Re: Discuss the VirtualBox 7.0.6 release

Post by mingle »

A minor annoyance in the 7.x branch...

When starting a VM from the 'Oracle VM Virualbox Manager' window, I typically shut down this window right after clicking-on and starting my VM, but with 7.x you have to wait until the VM has started to boot fully, or you get an error and the VM fails to start: "RPC_S_SERVER_UNAVAILABLE/0x800706ba (0X800706BA)". Was never an issue with 6.x

Cheers,

Mike.
tbessie
Posts: 5
Joined: 18. Dec 2008, 04:03

Using Host-only Network in VirtualBox 7.0.6 fails every time

Post by tbessie »

I upgraded to VirtualBox 7.0.6 on my Mac development machine.

I tried to boot an existing CentOS guest, which we have configured using the Host-only Adapter. I was informed that that is now deprecated, and a Host-only Network connection was created for me.

Whenever I try booting with it, however, it fails. I can boot with Internal Network, but not Host-only Network. I've followed a bunch of instructions I've found online for fixing this (clearing various system settings, uninstalling/reinstalling VirtualBox, updating Guest Additions, etc), but it continues not to work. Anyone know a way around this? Here's the error:

Error: vmnet_start_interface returned 1001 (VERR_INVALID_PARAMETER).
Failed to attach the network LUN (VERR_INVALID_PARAMETER).
Result Code:
NS_ERROR_FAILURE (0X80004005)
Component:
ConsoleWrap
Interface:
IConsole {6ac83d89-6ee7-4e33-8ae6-b257b2e81be8}

----------

EDIT: It looks like this was caused by VirtualBox's upgrade path being broken.

The created Virtual Network had parameters that didn't match those expected by the VM or somewhere else along the line.

When I deleted the Virtual Network that VirtualBox created upon upgrade, and recreated it, it worked.

Looks like someone should change the upgrade path in the installer.
Last edited by tbessie on 28. Feb 2023, 22:47, edited 2 times in total.
ShogoMaster
Posts: 1
Joined: 20. Feb 2023, 12:10

Re: Discuss the VirtualBox 7.0.6 release

Post by ShogoMaster »

Hi all. In the new version, the tab in the settings disappeared. Previously, there was a network tab in the VirtualBox global settings. Now she is gone. Where did she move to?
scottgus1
Site Moderator
Posts: 20965
Joined: 30. Dec 2009, 20:14
Primary OS: MS Windows 10
VBox Version: PUEL
Guest OSses: Windows, Linux

Re: Discuss the VirtualBox 7.0.6 release

Post by scottgus1 »

ShogoMaster wrote:Previously, there was a network tab in the VirtualBox global settings. Now she is gone. Where did she move to?
Look under the File menu, Tools, Network manager.
reine667
Posts: 8
Joined: 2. May 2022, 11:14

Re: Discuss the VirtualBox 7.0.6 release

Post by reine667 »

03/01/2023 Test VirtualBox-7.0.97-156054-Win: Host = Windows 11, Guest = Windows 11

VBoxGuestAdditions_7.0.97-155989
Using the 'new' 3D engine: VBoxManage setextradata "VM name" "VBoxInternal/Devices/vga/0/Config/VMSVGA10" ""
3D acceleration enabled Start menu (Windows Desktop) appears transparent→3D applications run 'very' fast
3D acceleration disabled The computer crashes on the Windows desktop (after a few seconds)
→ doesn't work

Deactivate the 'new' 3D engine: VBoxManage setextradata "VM name" "VBoxInternal/Devices/vga/0/Config/VMSVGA10" "0"
3D acceleration enabled Computer crashes on Windows desktop after a few seconds
3D acceleration disabled Computer crashes on Windows desktop after a few seconds
→ doesn't work


VBoxGuestAdditions_6.1.43-155609
Using the 'new' 3D engine: VBoxManage setextradata "VM name" "VBoxInternal/Devices/vga/0/Config/VMSVGA10" ""
3D acceleration enabled crashes on Boot (black screen)
3D acceleration disabled works
→ doesn't work

Deactivate the 'new' 3D engine: VBoxManage setextradata "VM name" "VBoxInternal/Devices/vga/0/Config/VMSVGA10" "0"
3D acceleration enabled works→3D applications run at speed of version 6.x
3D acceleration disabled works
→works

It can be seen that the new version 7 in combination with the guest additions of version 7 brings a leap in 3D performance ... if it then works reliably. For now, i will stay with version 6.

By the way... thanks to the developers of VirtualBox. A very good product...if anyone involved in the development is reading this.
AW-1992
Posts: 18
Joined: 6. Mar 2023, 02:41

Re: Discuss the VirtualBox 7.0.6 release

Post by AW-1992 »

Thank you to the devs and forum helpers.
cbf123
Posts: 3
Joined: 29. Jul 2022, 17:45

Re: Discuss the VirtualBox 7.0.6 release

Post by cbf123 »

I'm seeing a bug where virtio NICs show up as "Non-VGA unclassified device" when running "lspci" in the VM. With 6.1.42 they show up as "Ethernet controller". I've opened a bug report at https://www.virtualbox.org/ticket/21547
csmccarron
Posts: 50
Joined: 21. Aug 2013, 16:18
Primary OS: MS Windows 10
VBox Version: PUEL
Guest OSses: Windows 10 64 & 32, XP Mode
Location: VA

Re: Discuss the VirtualBox 7.0.6 release

Post by csmccarron »

Seamless mode is still broken.

viewtopic.php?f=2&t=99868&start=15#p533368
FranceBB
Posts: 104
Joined: 20. May 2017, 05:07
Primary OS: Fedora other
VBox Version: OSE Fedora
Guest OSses: Windows XP x86
Contact:

Re: Virtualbox Guest Addition 7.0.7 155584 break VBoxVGA on XP

Post by FranceBB »

FranceBB wrote:Hi there,
as part of the testing program, this is just to let you know that the new development snapshot 7.0.7 155584 drivers break VBoxVGA on Windows XP, in fact after installing and rebooting the screen becomes completely black.

How to reproduce:
1) Download VirtualBox 7.0.7 155584 https://www.virtualbox.org/download/tes ... _amd64.run
2) Install Extensions Pack 7.0.7 155601 https://www.virtualbox.org/download/tes ... ox-extpack
3) Download Guest Addition 7.0.7 155584 https://www.virtualbox.org/download/tes ... 155584.iso
4) Install the new Extensions Pack
5) Boot XP in Safe Mode
6) Install the new Guest Additions
7) Reboot in normal mode

the screen will then be blank, however the VM is responsive and you can easily turn it off via ACPI command from the Virtualbox interface.
Reverting to the Guest Addition 7.0.6 155176 fixes the issues: http://download.virtualbox.org/virtualb ... _7.0.6.iso
Also happening with 7.0.97-155730 as another user, Simple07, reported:
Simple07 wrote:I have installed Virtual Box 7.0.97-155730, it seemed fine initially, but after installing GuestAdditions Windows XP boots into a black screen. To uninstall GuestAdditions, I had to force shutdown the VM, then change the display setting from VBoxVGA to VMSVGA, then uninstall GuestAdditions.

Note: installing GuestAdditions 7.0.7-155584 did not help, still got black screen. But installing GuestAdditions 7.0.6-155176 worked, the screen is visible and can be resized easily !!!
and now I tried Virtualbox 7.0.97 r156271 from March 13th 2023 and sure enough it's still happening.
I had to revert the guest additions to 7.0.6 155176.
DangerD
Posts: 5
Joined: 23. Feb 2023, 00:21

Re: Discuss the VirtualBox 7.0.6 release

Post by DangerD »

Virtualbox hangs...

Steps to reproduce:
1. boot from live cd for example gparted
2. unmount cd
Vitrualbox hangs for a few minutes
Michel Metran
Posts: 4
Joined: 6. Apr 2023, 18:43

Re: Discuss the VirtualBox 7.0.6 release

Post by Michel Metran »

I'm using this version with Win host and with "Memory integrity" problems. VMs only work if "Memory integrity" is disabled.
Locked